Loading ...
Loading ...
Loading ...
INSTALLATION
UNPACKING
1. Check the package for damage. If any damage is visible you should mark the Bill of Lading you
sign that there may be concealed damage. If there is visible damage, contact the dealer you
purchased your appliance from.
2. Ensure the container is upright. If the container is not upright major damage can occur to your
appliance. If damage is discovered, do not refuse delivery. Contact the dealer and file
appropriate freight claims. Save all packaging material. Do not contact the manufacturer.
Your appliance was shipped from the dealer you purchased it from. Shipping damage claims
are to be resolved between the customer, shipping carrier and dealer. The manufacturer may
assist in resolving any such claims, but such assistance does not relieve you of your
responsibility.
3. Move the container as close to its installation location as possible. This will reduce moving and
handling your appliance once it is out of its shipping container.
4. Cut the straps holding the carton to the palette. Lift the box directly up and off the appliance.
Do not use a hammer. Do not cut the carton with a razor, utility or box cutting knife.
5. Thoroughly inspect your appliance for damage. If damage is discovered, do not refuse delivery.
Contact the dealer and file appropriate freight claims. Save all packaging material. Do not
contact the manufacturer. Your appliance was shipped from the dealer you purchased it from.
Shipping damage claims are to be resolved between the customer, shipping carrier and dealer.
The manufacturer may assist in resolving any such claims, but such assistance does not relieve
you of your responsibility.
6. Remove and unpack any accessories shipped with your appliance. Make sure no hardware or
accessories are left to be disposed of unintentionally.
7. Complete wiring connections in 4” handy box.
8. Insert unit into cabinet until front frame of unit is flush against cabinet.
9. Remove control panel of unit and insert screw through control box of unit into side of cabinet.
10. Test functionality of oven following the performance check list.
Loading ...
Loading ...
Loading ...