Loading ...
Loading ...
Loading ...
ENGLISH
49
TroubleshootingInformationHDMI Control FunctionPlaybackSetupConnectionsGetting Started Specications
When you make HDMI connections with a TV or AV Amp compatible
with DBP-A100 and HDMI control functions, you can perform the
following operations by setting up the HDMI control functions of
each device.
n TV or AV Amp power is turned on by operating the
DBP-A100 and functions change with DBP-A100
input.
n Turning off the TV’s power turns the DBP-A100’s
power to standby.
n Operating the DBP-A100 via the TV’s remote
control.
(When the TV’s remote control has player operation buttons)
If the HDMI control function does not operate properly, check the
following points.
• Is the TV or AV Amp compatible with the HDMI control function?
• Are the HDMI control function settings of all equipment correct?
(Step 3)
• After setting, did you add another HDMI device connection or make
any changes in the connections? If so make the settings again.
HDMI Control Functions
NOTE
• The HDMI control function controls operations of a TV that is
compatible with the HDMI control function. Make sure that the TV
and HDMI are connected when you perform HDMI control.
• Some functions may not operate depending on the connected TV
or AV Amp. Check the owner’s manual of each device for details
beforehand.
• When “Other Setup” – “Power Saving” on the GUI menu is set
to “Power Saving Standby” or “Normal Standby” (vpage 31),
the player’s power cannot be turned on using the HDMI control
function.
• When “HDMI Setup” – “HDMI Control” – “Power Off Control” on the
GUI menu is set to “Off” (vpage 24), the DBP-A100 does not go
to standby even if the connected device is in the standby mode.
• When “DENON LINK Setup” – “DENON LINK Mode” on the GUI
menu is set to “4th”, the HDMI control function is enabled for the
connected devices.
1
Set the HDMI control function to “On”.
On the GUI menu, set “HDMI Setup” – “HDMI Control” (vpage
24).
2
Turn on all the equipment connected by HDMI cable.
3
Set the HDMI control function for all equipment
connected by HDMI cable.
On the GUI menu, set the DBP-A100 with “HDMI Setup” –
“HDMI Control” (vpage 24).
b Please refer to the owner’s manuals of connected devices for how
to make settings.
b Carry out Steps 2 and 3 if any of the equipment was unplugged.
4
To ensure that the DBP-A100’s HDMI video output is
projected on the TV screen, change the input function
of the TV and AV Amp.
5
When you turn the TV’s power to standby, check that
the power of the DBP-A100 and AV Amp also goes on
standby.
HDMI Control Function
Loading ...
Loading ...
Loading ...