Loading ...
Loading ...
Loading ...
TroubleshootingInformationHDMI Control FunctionPlaybackSetupGetting Started Specications
ENGLISH
13
1. Home Theater Playback – Playing on a Multi-channel System –
Connections
• When connecting with an HDMI cable, press and set it to “HDMI On”.
• Your DBP-A100 automatically detects the audio/video signal supported by the connected HDMI
device and outputs the signal. To change the setting, see “HDMI Setup” on the GUI menu
(vpage 23, 24).
NOTE
• When you press and set it to “HDMI On”, no video signals are output from the component
video outputs.
• To disable video or audio output from the HDMI terminal, set the “Video Out” of the “Pure Direct
Setup”, which outputs high quality analog audio, to “Off”. To enable the HDMI signal output, set the
Pure Direct mode to one of the following settings:
• Pure Direct mode “Off” or “User Preset 1” or “User Preset 2” (b)
(“Playing Back High-Quality Audio (Pure Direct Function) ” vpage 38)
b Do this after setting “Pure Direct Setup” – “User Preset 1” or “User Preset 2” – “Video Out” on the
GUI menu to “On” (vpage 28).
Using an HDMI Cable to Connect to an AV Amp or Television
With “HDMI On”
Audio/video signals are output from the HDMI terminal.
When the HDMI video resolution is set to “Auto” as described in “HDMI Video Resolution Settings”
(vpage 13), the DBP-A100 outputs the highest resolution video signal that is supported by the
connected equipment.
IN
HDMI
AV Amp or
TV
With “HDMI Off”
Audio/video is not output from the HDMI terminal.
NOTE
• When audio/video signals are output from the HDMI terminal, no video signals are output from the
component terminals.
• When a signal comprising 24 frames per second, such as 1080P24, is output from the HDMI terminal,
no video signals are output from the video or S-Video outputs.
n Connection to a device with a DVI-D terminal
If you use a HDMI/DVI-D conversion cable (sold separately), HDMI video signals are converted to DVI-
D signals, enabling connection to a device with a DVI-D terminal.
NOTE
• In this case, the audio signal is not output. Make the appropriate audio connections for your devices.
(vpage 14 ~ 20).
• The video signal will be in RGB format.
• You cannot output to a DVI-D device that does not support HDCP (high-bandwidth digital content
copyright protection system).
• Video may not be output depending on the combination of devices.
Setting HDMI Video Output
n Make HDMI Output Signal and HDMI Control Function Settings
“HDMI Setup” (vpage 23, 24)
n Make the Video Output Signal Setting for the Connected Television
“Video Setup” (vpage 24)
n HDMI Video Resolution Settings
• Change the HDMI video resolution by pressing . Switch the output mode as follows. The default
settings is underlined.
Auto
480/576i
1080P24
1080P
1080i
480/576P
720P
Source Direct
• If the HDMI resolution is not set to “Auto”, set it to correspond with the resolution of your television.
Images will not be projected normally if the television resolution and DBP-A100’s output resolution do
not match.
• Audio and video will be temporarily interrupted if the power of the connected device currently playing
is turned off, or the input is switched.
• When you change the HDMI video resolution of the DBP-A100, it takes a few seconds up to about 10
seconds for validation between the DBP-A100 and the connected device. Audio/video is not output
during this period.
• When outputting deep colour or 1080p, etc., we recommend you use a High Speed HDMI cable for
enhanced high-quality playback.
Required Settings for HDMI Connection
(480/576 interlaced)
(480/576 progressive)
(720 progressive)(1080 interlaced)(1080 progressive)(1080 progressive, 24-frame)
(Source direct)
(Auto)
When outputting a video signal comprising 24 frames per second from the HDMI terminal, select
“1080P24” or “Source Direct” after setting the GUI menu “HDMI Setup” – “I/P Direct” (vpage 23) to
“On”.
See overleaf
Loading ...
Loading ...
Loading ...