Loading ...
Loading ...
Loading ...
TroubleshootingInformationHDMI Control FunctionPlaybackConnectionsGetting Started Specications
ENGLISH
27
Setting items
Setting contents
Source Direct
Disables the speaker and
subwoofer settings and
outputs the disc audio as is.
NOTE
Set to within the playback
frequency band of the
amplier you will use:
“On” at “50 kHz” or “100
kHz”. Settings outside the
frequency band can result
in damage to your amplier
and even re.
Off : Enables the speaker and subwoofer settings.
On : 50kHz : Outputs the disc content as is. When playing Super Audio
CD, outputs up to 50 kHz audio signals.
On : 100kHz : Outputs the disc content as is. When playing Super Audio
CD, outputs up to 100 kHz audio signals.
• Setting “On: 50 kHz” or “On: 100 kHz” enables full-range playback
on all channels recommended for DTS. (Note that this results in a 5
dB increase in subwoofer volume, and a 15 dB increase with Super
Audio CDs). This also allows you to play back the 6-channel source of
DVD-Audio recorded on all channels with the full frequency range. In
this case, make analog connections according to the disc operating
manual.
• When set to “On: 50 kHz” or “On: 100 kHz”, all speaker sizes are set to
“Large” and “Yes” is set for the subwoofer.
• Even when set to “On: 50 kHz” or “On: 100 kHz”, the “Channel Level”
and “Distance” settings can be made.
Compression
Compresses the dynamic
range of Dolby TrueHD/
Dolby Digital/Dolby Digital
Plus audio. At night or other
times when you cannot play
back at high volume, this
compensates by reducing
high level sounds and
increasing low level sounds.
Auto : Automatically compresses the Dolby TrueHD audio dynamic
range. The sound is not compressed when playing signals other than
Dolby TrueHD signals.
Off : Dynamic Range compression is not applied.
Low : Sets minimum dynamic range compression.
Middle : Sets medium dynamic range compression.
High : Sets maximum dynamic range compression.
BD Effect Sound
Sets for a clicking and other
sound outputs during BD
popup menu operation.
On : Outputs BD effect sound.
Off : Does not output BD effect sound.
Audio Setup
Setting items
Setting contents
BD Re-Encoder
Sets the format during
output of the BD’s Mix
Audio signal from the digital
output terminal.
Auto : Outputs the primary audio (main audio) in the same type of audio
format. Dolby Digital/Dolby Digital Plus/Dolby TrueHD are output as
Dolby Digital, DTS/DTS-HD are output as DTS and Linear PCM is output
as Linear PCM.
Dolby Digital：Outputs to the digital audio output terminal (optical/
coaxial) with Dolby Digital.
DTS : Outputs to the digital audio output terminal (optical/coaxial) with
DTS.
Valid when “BD Audio Mode” is set to “Mix Audio Output” (vpage
32).
Digital Out
Sets the audio signal of
digital audio output.
For more information on each
audio signal, refer to “Audio
Signal from the Digital Audio
Output (Optical/Coaxial)
Terminal” (vpage 17).
Bitstream : Outputs a bitstream signal. Converts Dolby TrueHD, Dolby
Digital Plus to Dolby Digital, and DTS-HD to DTS for output.
PCM : Outputs the downmixed audio signal to 2-ch LPCM.
PCM Down Sampling : Converts sampling frequency audio greater than
48 kHz to a 48 kHz 2-ch LPCM audio output signal.
• When outputting CD, etc. to a digital recording device, such as a CD
recorder, convert to PCM or PCM down sampling.
• When a disc with recorded Linear PCM or PPCM (Packed PCM) is played
back, this outputs Linear PCM regardless of the setting.
Downmix
Sets the method used to
convert a multi-channel
audio signal to a 2-channel
signal.
Lt/Rt : Signals are converted to Dolby Surround compatible 2-channel
audio signals for output. This setting is valid for DTS-HD, DTS Digital
Surround, Dolby Digital Plus and Dolby Digital audio signals. (If the
connected AV Amp is Dolby Pro Logic compatible, the AV Amp plays
back using surround audio.)
Stereo : Outputs by converting to 2-ch (stereo) audio.
NOTE
In order to enable the “Lt/Rt” setting when playing back BD, set “BD
Audio Mode” to “HD Audio Output” (vpage 32).
Remote control operation
buttons
:
Displays the menu
Cancels the menu
:
Moves the cursor
(Up/Down/Left/Right)
:Makes the setting :Returns to previous menu
Setup
Loading ...
Loading ...
Loading ...