Loading ...
Loading ...
Loading ...
2. Move chokeleverto "CLOSE"position (Figure22).
NOTE:
For a warm engine, be surethe chokeleveris inthe "OPEN"
position.
Figure22 - Choke Lever
Open
.
Close
Move throttle control lever to "HIGH" position, shown on
engineas a rabbit (Figure23).
Figure 23 - Throttle Control
High Low
IMPORTANT: Beforestarting the power washer, be sure you are
wearing adequatesafetygoggles.
Risk of eye injury.Spraycan splashback or propel
'>_0 objects.
.
6.
Alwayswear safetygoggleswhen usingthis equipmentor in
vicinityof equipmentin use.
Beforestarting the power washer,be sure you are wearing
adequatesafetygoggles.
NEVERsubstitutesafetyglassesfor safetygoggles.
Placefoot onfootpad or otherwise secureunit from movement
when pulling recoil.
When starting the engine, grasp starter grip handle (Figure
25) and pull slowly until you feel some resistance.Then pull
rapidly to start engine.
Starter cordkickback (rapidretraction)can result in
bodily injury.Kickback will pull handand arm toward
enginefaster thanyoucan let go. Broken bones,
fractures, bruises, or sprainscouldresult.
* NEVERpullstartercordwithoutfirstrelievingspraygunpressure.
* Whenstartingengine,pullcord slowlyuntil resistanceis felt and
thenpullrapidlyto avoidkickback.
* Aftereachstartingattempt,whereenginefailsto run,alwayspoint
sprayguninsafedirectionandsqueezesprayguntriggerto release
highpressure.
Firmlygraspspraygunwith bothhandswhenusinghighpressure
sprayto avoidinjurywhenspraygunkicksback.
Returnstarter grip handleslowly.DONOTlet rope"snap back"
againststarter.
®
7.
Figure25 - Starting the Engine
StarterHandle
.
Turnthe engineswitch to the "ON" position (Figure24).
Figure24 - The ONPosition
8. When engine starts, slowly move choke lever to "OPEN"
position as enginewarms. If enginefalters, move chokelever
to "CLOSE"position,then to "OPEN"position (Figure26).
12
Loading ...
Loading ...
Loading ...