Loading ...
Loading ...
Loading ...
Figure 18 - Chemical Tank & Cover
Container
Cap
4. Dependingon model, insert filter on end of siphoning tube
throughthe hole in the loose cap (supplied) (Figure19).
5. Install cap andsiphoningtube onto tank.
6. Make sure siphoning tube remains fully submerged into
detergent.
Figure lg - Install Siphoning Tube
NOTE:
Make surethe filter remainsfully submergedin detergent
while applying detergent.
NOTE:
Contactwith the hotmuffler can damage detergent siphoning
tube.
.
* When inserting the siphon into a detergent solution bottle, route
the tube so as to keep it from inadvertently contacting the hot
muffler.
Make sure black detergent nozzle is installed.
NOTE:
Detergent cannotbe applied withthe highpressurenozzle
(Yellow,White,Greenor Red). Only use the Black nozzlewith
detergent.
8. Confirm set-up instructions have beenfollowed.
NOTE:
Youmustattachall hosesbefore youstart the engine.
1o
* Startingtheenginewithoutallthehosesconnectedandwithoutthe
waterturnedONwill damagethe pump.
* Damageto equipmentresultingfromfailureto followthisinstruction
willvoidwarranty.
9. Start enginefollowing instructions How to Start Your Power
Washer.
10. Apply detergent to a dry surface, starting at lower portion
of area to be washed and work upward using long, even,
overlappingstrokes.
11. Allow detergentto "soak in" for 3-5 minutes before washing
and rinsing. Reapply as needed to prevent surface from
drying. DO NOT allow detergent to dry on surface being
cleaned(preventsstreaking).
IMPORTANT:Youmust flush the detergentsiphoningsystem after
each use by placing the filter into a bucket of cleanwater,then run
the powerwasher in low pressurefor 1-2 minutes.
POWERWASHERRINSING
1. Removeblackdetergentnozzlefrom lance.
2. Select and install desired high pressure nozzle following
instructions Howto Use Nozzles.
3. Point spray gun in safe direction and away from people,
animals and plants. Squeezetrigger to flush any remaining
chemical from system.
4. Keepspraygun a safe distancefrom areayou planto spray.
_ _ Kickback from spraygun can causeyouto fall.
* Useonlyon a levelsurface.
* Donot useon elevatedsurfaceto preventthe risk
of a seriousfall.
* Beextremelycarefulif you must usethe powerwasherfrom a
ladder,scaffolding,or anyothersimilarlocation.
* Firmlygraspspraygunwith bothhandswhenusinghighpressure
sprayto avoidinjurywhenspraygunkicksback.
5. Apply a high pressurespray to a small area and then check
surface for damage. If no damageis found, you can assume
it is okay to continuerinsing.
6. Start at top of area to be rinsed, working down with same
overlappingstrokesas you usedfor cleaning.
CLEANINGDETERGENTSIPHONINGTUBE
If you used the detergent siphoning tube, you must flush it with
clean water beforestoppingthe engine.
1. Place detergentsiphoning tube/filter in a bucket full of clean
water.
2. Removehigh pressurenozzlefrom nozzle extension.
3. Selectandinstall blackdetergentnozzlefollowing instructions
How to Use Nozzles.
4. Flushfor 1-2 minutes.
5. Shut off engine following instructions How to Stop Power
Washerand turn off water supply.
6. ALWAYSpoint spray gun in a safe direction, squeezespray
gun trigger to release retained high water pressure. Engage
trigger lock when not in use.
Loading ...
Loading ...
Loading ...