Loading ...
Loading ...
Loading ...
Leak Check
[_ Turn on gas supply. If your dryer is equipped with manual
valve, make sure that it is in the on position.
[_ Brush or spray a soap and water solution onto pressure
tap and union nut and inspect for leaks indicated by
growing bubbles.
[_ If dryer was moved during conversion, use this same
method to check for leaks in the flexible gas supply line
and any fittings between the dryer and the gas supply pipe.
[_ If any bubbles are present, tighten the leaking connection
and retest for leaks.
21. Reassemble the front panel in the reverse order.
22. Tilt console up back in position and tighten screws.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
23. Plug in dryer or reconnect power.
24.
To make sure the dryer is working properly:
[_ Turn on dryer.
[_ Run on high for 5 minutes.
[_ Check for heat in drum.
©Whirlpool Corporation 2011 4 W10436338A
(All rights reserved)