Loading ...
Loading ...
Loading ...
4. Connect to power source, press the power switch to “I” position to power on the unit. The
coffee indicator will flashing blue. The appliance will start heating.
5. When the indicator becomes solid, it shows the pre-heating is finished. Turn the operation
knob to the “ ” position. The water will flow out.
6. After about one minute, turn the operation knob to the
“
O
”
position to stop brewing, you
can pour the water in container out then clean them thoroughly, now you can start brewing.
Note: There may be noise when pumping the water on the first time, it is normal, the
appliance is releasing the air in the appliance. After about 20s, the noise will disappear.
PREHEATING
To make a cup of good hot Espresso coffee, we recommend you shall preheat the appliance
before making coffee, including the funnel, steel mesh and cup, so that the coffee flavour can
not be influenced by the cold parts.
1. Remove the detachable tank and open the tank cover to fill it with desired water, the water
level should not exceed the “MAX” mark in the tank. Then place the tank into the appliance
properly.
2. Set steel mesh into metal funnel (without coffee powder), make sure the tube on the funnel
aligns with groove in the appliance, then insert the funnel into the appliance from the
“INSERT” position, and you can fix them into coffee maker firmly by turning it
anticlockwise until it is at the “LOCK” position.
3. Place an espresso cup (your cup) on removable cup shelf.
4. Then connect the appliance to power source. Make sure the operation knob is on the “O”
position.
5
.
Pr
ess
d
ow
n t
he
p
ower
s
witch
t
o
“I” p
osition
t
o
p
ower
o
n
t
he
u
nit
. T
he
c
offee
i
ndicator
w
ill
4
Loading ...
Loading ...
Loading ...