Summit SWBC3041 30" Wide Built-In Indoor/Outdoor Combination Wine Cellar/Kegerator

User Manual - Page 6

For SWBC3041.

PDF File Manual, 16 pages, Read Online | Download pdf file

SWBC3041 photo
Loading ...
Loading ...
Loading ...
6
INSTALLATION INSTRUCTIONS
Before Using your Appliance
Remove the exterior and interior packing.
Before connecting the appliance to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Install the handle on the door, if it is not already attached.
Installation of your Appliance
This appliance is designed for built-in, recessed, or free-standing installation.
Place your appliance on a floor that is strong enough to support it when it is fully loaded.
To level the unit, adjust the front leveling legs.
Take care that the air vent at the front of the appliance is never covered or blocked in any way.
NOTE: It is recommended that you do not install the appliance near an oven, radiator, or other
heating source. Heat sources may increase electrical consumption. Don’t install in a location
where the temperature will fall below 50°F (10°C). For best performance, do not install the
appliance behind a cabinet door or block the base grille.
Avoid locating the unit in moist areas.
Plug the appliance into an exclusive, properly grounded wall outlet.
Electrical Connection
This appliance should be properly grounded for your safety. The power cord of this appliance is
equipped with a three-prong plug which mates with standard three-prong wall outlets to minimize the
possibility of electrical shock.
Do not under any circumstances cut or remove the third (ground) prong from the power cord
supplied. For personal safety, this appliance must be properly grounded.
This appliance requires a standard 115/120 Volt AC ~ 60Hz three-prong grounded electrical outlet.
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly
grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation
to have it replaced with a properly grounded 3-prong wall outlet.
To prevent accidental injury, the cord should be secured behind the appliance and not left exposed
or dangling.
Loading ...
Loading ...
Loading ...