ON STAGE 3 User Manual

Loading ...

troubleshooting your jbl On Stage III

Symptom

Possible Problem Solution

If you have any questions or need further assistance, please visit www.jbl.com.

These speciﬁcations are subject to change without notice.

NosoundfromtheJBL

On Stage III speaker

system

Technical Speciﬁcations

Frequency Response:

70Hz – 20kHz

Power Consumption:

20WMaximum

Power Input:

12V/1.5A

JBLOnStageIIITransducer:

(4) 1

Full range per channel

Dimensions:

Diameter – 7 1/2

(190mm)

Height – 2

(51mm)

SystemWeight:

1.12 lb (0.51kg)

Battery:

Size – AA

Type–Alkaline,NiMh

DONOTMIXBATTERYTYPES.

DONOTMIXCHARGEDAND

PARTIALLYCHARGEDBATTERIES.

BATTERIESWILLNOTRECHARGE

WHILEINJBLONSTAGE III.

Ensure that the power supply is connected to a live

powersourceandproperlyconnectedtotheJBLOn

StageIII.Note:WhentheJBLOnStageIIIispowered,

agreenpowerLEDontheJBLOnStageIIIshould

light up.

Touch the volume “Up” (+) pad on the volume control

to unmute and/or increase the system volume level.

Note: Touching the volume “Down” (–) pad lowers

the system volume. Touching both the (+) and (–)

volume control pads at the same time will mute the

system.

Increase the volume level on the audio source device.

Replace the batteries.

Press the Play button on the iPod or remote control.

If the iPod is paused more than 10 minutes, press the

JBLOnStageIII’sPowerbuttontoturntheunitback

on.

No power to the system

Power adapter plug is not

inserted correctly

No volume or low volume

Input source volume is low

Lowordrainedbatteries

iPod is paused

iPod is paused (battery-only

mode)

SoundQuality

Loading ...

JBL On Stage 3 Portable Loudspeaker Dock For Ipod

User Manual - Page 6