Loading ...
Loading ...
Loading ...
ILti_;! I_i i _ r;! _[o]_
PRODUCT SPECIFICATIONS
HORSEPOWER f3 HP
DISPLACEMENT 20.85 cu. in.
GASOLINE 4 quarts
CAPACITY (unleaded)
OIL CAPACITY 5W30
(28oz capacity)
SPARK PLUG: Champion RC12Y(
(Gap .030in.) or
equivalent
VALVE CLEARANCE
Intake: 0.004 - 0.006 In.
Exhaust: 0.009 - 0.011 In.
SNOW THROWER
AUGER DRIVE BELT
Adjust the auger drive belt after the first
2 to 4 hours of use, again about mid-
season and twice each season thereaf-
ter (See "Belt Adjustment" in the
Service and Adjustment section).
AUGER SHAFT LUBRICATION
EVERY 10 HOURS
1. Lubricate the Zerk fittings (A) everyten
hourswitha grease gun.
2. Each time a shear bolt is replaced,
the auger shaft MUST be greased.
See Figure 25. See To Replace Au-
ger Shear Bolt in the Service and
Adjustment section.
A
Figure 25
AUGER GEAR BOX
The auger gear box is lubricated at the
factory and should not require addition-
al lubrication, lffor some reason the
lubricant should leak out, have auger
gear case checked by a competent re-
pairman.
F-031068L 21
Loading ...
Loading ...
Loading ...