Loading ...
Loading ...
Loading ...
l using orRestarting
1. To pause the washer at any time, select PAUSE/CANCEL
2. To continue the cycle, select HOLD TO START (for
approximately 1 second).
ChangingCycles,Options andModifiers
Not all Options and Modifiers are available with all cycles. Cycles,
Options and Modifiers can be changed anytime before HOLD TO
START is selected.
Options and Modifiers can be changed anytime after HOLD TO
START is selected and before the start ofthe selected Option or
Modifier.
To cancel a cycle and select a new cycle
1. Select PAUSE/CANCEL twice.
2. Select desired cycle.
3. Select the desired OPTIONS or MODIFIERS.
4. Select HOLD TO START (for approximately 1 second) to
restart the washer st the beginning of the new cycle.
To cancel a cycle
1. Select PAUSE/CANCEL twice.
2. The washer powers down, the door unlocks, and clothes can
be removed.
NOTE: Ifthe water level or the temperature istoo high, the
washer will drain automatically before the door unlocks.
To change Options or Modifiers after the cycle has started
1. Select PAUSE/CANCEL
2. Select the desired OPTIONS or MODIFIERS.
3. Select HOLD TO START (for approximately 1 second) to
continue the cycle.
To drain the washer manually
1. Select PAUSE/CANCEL
2. Select DRAIN/SPIN.
3. Select HOLD TO START (for approximately 1 second) to
begin the drain.
4. When the spin is complete, the door unlocks. Items can be
removed from the washer.
StatusLights
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional
item to the wash cycle and when the controls are locked.
• dddeG_we_i
• Seek
e_
• Coeds/_cked
• Deerreded
Adding items
This washer allows an 8-minute period inwhich forgotten
garments may be added to the load. You can add items to the
washer if the Add a Garment status light isglowing.
To add items
1. Select PAUSE/CANCEL The washer door unlocks, and Items
can be added.
2. To continue the cycle, cloes the door and salect HOLD TO
START (forapproximately 1 second).
3. To unlock the door after the Add a Garment period, press
PAUSE/CANCEL twice. This will cancel the Wash Cycle.
Cycle Complete
The cycle complete light stays on for 5 minutes after the cycle is
complete, and then the washer shuts off.
Locking controls
The Control Lock prevents unintended use of the washer. You
can also use the control lock feature to prevent unintended cycle
or option changes during a cycle. When CONTROL LOCKED is
lit, all buttons are disabled except for PAUSE/CANCEL and
START. You can lock the controls while the washer is operating.
To lock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds.
o _der
• s0_
o0ff
©
The CONTROL LOCKED status light glows.
To unlock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds until the
CONTROL LOCKED Status light turns off.
Door Locked
Whenthestatuslightglows,thedoor islocked,
Estimated time remaining
The cycle times vary automatically based onyour water pressure,
water temperature, detergent, and clothes load. The cycle time
will be extended if overeudsing occurs or the load is unbalanced.
The SUDs routine removes extra suds and assures proper rinsing
of your garments. During the unbalance routine the time
displayed may pause until this activIty is complete, then resume
with the remainder of the cycle.
13
Loading ...
Loading ...
Loading ...