Loading ...
Loading ...
Loading ...
OVENWINDOW(S)
TO PROTECTTHEOVENDOORWINDOW:
1. Donot useabrasivecleaningagentssuch
as steelwool scouringpadsor powdered
cleanersas theymayscratchthe glass.
2. Donot hit the glasswithpots, pans,furni-
ture,toys, orother objects.
3. Do not closethe ovendoor untilthe oven
racks are in place.
Scratching,hitting,jarringorstressingtheglass
mayweakenitsstructurecausinganincreased
riskof breakageat a laterdate.
UPPER AND LOWER OVEN
LIGHTS(SELECTMODELS)
Toassurethe properreplacementbulbis
used, order bulb from MaytagCustomer
Service.Call 1-800-688-8408,askforpart
number74004458- halogenbulb.
LOWEROVENLIGHT
(SELECTMODELS)
LEVELINGLEGS
Besuretheanti-tipbracketsecuresone of
the rear leveling legs to the floor. This
bracketpreventsthe rangefromacciden-
tallytipping.
The rangeshouldbeleveledwhen
installed. If the rangeis not level, /_J
turn the plastic leveling legs, Io- J ]
cated at each corner of the _,1
range, until range is _ '_,',J
level. L::__;: /
\LEVEZ//VG LEG
CONVENIENCEOUTLET
(CA.ADIANMODELSONLY)
Theconvenienceoutletis locatedon the lower
leftside of the backguard.
Besureappliancecordsdo not restonor near
the surfaceelement.If the surfaceelementis
turnedon,thecordandoutletwillbe damaged.
Theconvenienceoutletcircuitbreakermaytrip
if the small applianceplugged into it exceeds
10amps.To resetthecircuitbreaker,pressthe
switchlocatedonthe loweredgeof the back-
guard.
TO REPLACEOVEN LIGHTBULB:
1. Whenoveniscool,usefingertipstograsp
edgeof bulbcover.Pull out andremove.
2, Carefully remove old bulb by pulling
straight out of ceramicbase.
3, To avoiddamagingor decreasingthelife
ofthenewbulb,donottouchthebulbwith
barehandsor fingers.Holdwithaclothor
paper towel. Push new bud prongs
straight into smallholesofceramicbase.
4, Replace bulb cover by snapping into
place.
5, Reconnectpower to the range. Reset
clock.
BULB COVER
WIRE
RETAINER
TO REPLACEOVENLIGHT BULB:
1. When oven is cool, hold bulb cover in
place, then slide wire retaineroff cover.
NOTE: Bulb cover will fall if not held in
place while removingwire retainer.
2. Removebulb coverand light bulb.
3. Replacewith a 40-wattappliancebulb.
4. Replacebulbcover and secure with wire
retainer.
5. Reconnectpowerto range.Resetclock.
CIRCUIT BREAKER SWITCH
]5
Loading ...
Loading ...
Loading ...