Loading ...
Loading ...
Loading ...
EN
Operation CF18, CF25, CF35, CF40, CF50
18
CF25, CF35, CF40, CF50
➤ Press the “ON/OFF” button (fig. 4 1, page 10) for between one and two
seconds.
✓ The “POWER” LED lights up.
✓ The display (fig. 4 5, page 10) switches on and shows the current temperature.
I
✓ The cooler starts cooling the interior.
I
Latching the cooler lid (CF35, CF40)
➤ Close the lid.
➤ Press the latch (fig. 2 1, page 8) down, until it latches in place audibly.
7.6 Setting the temperature
A
CF18
➤ Set the cooling level with the temperature controller (fig. 3 1, page 9).
CF25, CF35, CF40, CF50
➤ Press the “SET” button (fig. 4 4, page 10) once.
➤ Use the “UP +” (fig. 4 6, page 10) and “DOWN –” (fig. 4 7, page 10) buttons
to select the cooling temperature.
✓ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
NOTE
During low voltage:
If switched off by the battery monitor due to low voltage, the display
goes blank, and the LED “POWER” flashes orange.
NOTICE! Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
CF18-CF60-O-AUS.book Seite 18 Dienstag, 27. Februar 2018 2:14 14
Loading ...
Loading ...
Loading ...