Loading ...
Loading ...
Loading ...
EN
Operation CF18, CF25, CF35, CF40, CF50
14
7.2 Energy saving tips
• Choose a well ventilated location which is protected from direct sunlight.
• Allow warm food to cool down first before placing it in the cooling device.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• Defrost the cooling device once a layer of ice forms.
• Avoid unnecessarily low temperatures.
7.3 Connecting the cooler
Connecting to a battery (vehicle or boat)
The cooler can be operated with 12 V
g or 24 Vg.
A
For safety reasons the cooler is equipped with an electronic system to prevent
polarity reversal. This protects the cooler against short-circuiting when connecting to
a battery.
Using the fused DC plug
A
➤ Plug the DC connection cable (fig. 1 2, page 6) into the DC power supply inlet
of the cooler (fig. 5 1, page 11/fig. 6 3, page 11).
➤ Connect the connection cable to a DC power outlet.
NOTICE! Danger of damage!
Disconnect the cooler and other consumer units from the battery before
you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
NOTICE! Danger of damage!
For protection of the device the DC cable supplied includes a fuse inside
the plug. Do not remove the fused DC plug.
Only use the DC cable supplied.
CF18-CF60-O-AUS.book Seite 14 Dienstag, 27. Februar 2018 2:14 14
Loading ...
Loading ...
Loading ...