Loading ...
Loading ...
Loading ...
Use wall controller to control the fan speed.
Switch knob to 0 to turn off the fan.
Switch knob to 1 to turn the fan in high speed.
Switch knob to 2 to turn the fan in high-medium speed.
Switch knob to 3 to turn the fan in medium speed.
Switch knob to 4 to turn the fan in medium-low speed.
Switch knob to 5 to turn the fan in low speed.
Note: Allow one ceiling fan to operate from one wall control.
Turn ON the electric circuit at the
main fuse or circuit breaker box.
Attach the canopy to the ceiling and attach the
downrod stand cover to the housing then secrure
them with set screws.
After the all control splices have been made, put the wires
carefully into the wall outlet box.
Reattach the wall control back to the mounting strap with two
set screws.
Turn the arrow of the knob to the “0” position marked on the
wall control.
Canopy
Set Screw
Mounting Strap
Wall Control
Set Screw
Downrod
Set Screw
Downrod Stand
Cover
Make wire connections in wall outlet box: (See Fig.9)
1). The white (neutral) wire from main power to the white (neutral)
wire from the ceiling outlet box with a wire connector.
2). The black (hot) wire from main power to the black wire from the
wall control (with “to main power” sticker) with wire connector.
3). The black (hot) wire from ceiling outlet box to the black wire
from the wall control (with “to ceiling outlet box” sticker) with
wire connector.
PAGE: 7 / 8
201202
Loading ...