Loading ...
Loading ...
Loading ...
Roller
Fan Motor
Assembly
PAGE: 5 / 8
Secure blade brackets to the fan motor assembly with motor screws.
Attach the roller of the fan
motor assembly to the hook
of the hanger bracket in
position. Then hang the
safety cable on to the safety
cable hook.
Unscrew the set screws and remove
the mounting strap from wall control.
Turn OFF the electric circuit at the
main fuse or circuit breaker box.
Tighten the hanger bracket to the outlet box with two mounting screws. (Make sure
the outlet box is securely installed so that it will be able to support the fan
weight.) Attach the safety cable hook to the ceiling with the dry wall screw and
washer, and make sure the safety cable hook is covered by the fan canopy.
WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED “ACCEPTABLE FOR
FAN SUPPORT”.
Wall Controller
Set Screw
Motor Screw
Blade
Mounting Strap
Hanger Bracket
Hook
NOTE: The fan weight is 12.79 lbs (5.8 kgs). Be sure the outlet box you are using is securely attached to the building
structure and can support the full weight of the fan. Failure to do so can result in serious injury.
INSTALLATION INSTRUCTIONS
IMPORTANT:
BEFORE YOU BEGIN INSTALLATION, CAREFULLY READ ALL INFORMATION PROVIDED IN THE
SAFETY INSTRUCTIONS AND INSTALLATION INSTRUCTIONS. IF IN DOUBT, CONSULT A QUALIFIED
ELECTRICIAN.
SAVE ALL INSTRUCTIONS.
201202
Loading ...
Loading ...
Loading ...