Loading ...
Loading ...
Loading ...
OPERATION
OvenControl,ClockandTimer
(UpperOven)
Your new control has a series of
tones that will sound at different times
These tones may sound while you set
the control for an oven function, or at
the end of the oven function, tt will also
alert you that there may be a problem
with the functions Below are the types
of tones and a brief description of
each.
TONES WHILE SETTING THE
CONTROL- When you press a touch
pad you wil! hear a beep This beep
will let you know you have placed
enough pressure on the pad to
activate it. (The arrow pads do not
beep).
END OF TIMED CYCLE TONE --At
the end of a timed cooking function,
you will hear 3 short beeps followed
by 1 beep every 6 seconds. This
6-second beep wilt continue to sound
unti! the CLEAR/OFF pad is pressed
or you may select the special feature
to cancel this 6 second beep from
sounding at the end of future cycles
TO CANCEL THE 6 SECOND BEEP
1,
Press and hold the BAKE and
BROIL pads, at the same time
for 3 seconds, until the display
shows "SF°"
2. Press the KITCHEN TIMER
ON/OFF pad The display will show
"CON BEEP" (continuous beep)
3. Press the KITCHEN TIMER
ON/OFF pad again. The display
will show "BEEP" (beep canceled).
4. Press the START pad to cancel
the 6-second beep and leave the
special feature mode.
If you would like to return the 6-second
beep, repeat steps above until the
display shows your choice and press
the START pad.
AI"TENTION TONE-- This tone will
sound if you make an error or an
oversight is made while setting an
oven function,
Examples would be:
a. Setting a clean cycle and the oven
door is not properly closed,
b. Setting a function and not pressing
the START pad.
c. Pressing an additional function
pad without first setting a temperature
or time,
du
ERR will flash if you set an invalid
temperature Press the CLEAR!OFF
pad to clear the control and the oven
function
Any of these can be quickly identified
by watching the display
PREHEAT TONE-- When you
set an oven temperature, the oven
automatically starts to heat When the
temperature inside the oven reaches
the temperature you have set, a tone
will sound to let you know the oven is
ready for baking
If you set an oven function and the
control beeps while the display is
flashing "F" and a number or letter
such as "F-4" or "FI," there may be
a problem with the control or oven.
Simply press the CLEAR/OFF pad
and wait about an hour. Try setting the
function again If the code repeats,
write down the flashing code and call
for service. Tell the technician what
code was flashing
9
Loading ...
Loading ...
Loading ...