Loading ...
Loading ...
Loading ...
CAREANDCLEANING
RemovableParts
TO REMOVE
1.
2.
Fully open the
door.
Push the hinge .
,o sdow
toward the door
frame, to the _i_
unlocked Slot
position _i!i! _
This may
requ,re a '_ii!i_
flat-blade
screwdriver Hinge Arm
Hinge Lock
(Unlocked
Position)
3. Firmly grasp both
sides of the door at
the top
4. Close door to the
door removal
position, which is
halfway between
the broil stop and
fully closed
5. Lift door up and
i[
Removal Position
out until the hinge arm
is clear of the slot
TO REPLACE
1,
m
Firmly grasp both Bottom
sides of the door at Edge of
Slot
the top,
With the door at the
same angle
as the removal
position, seat the
indentation of the
hinge arm into
the bottom edge of
the hinge slot, The
notch in the hinge
arm must be fully
seated into the
bottom of the slot,
Indentation
Hinge
Arm
Removable Oven Door (cont.)
3. Fully open the Locked
Position
door
4. Push the hinge
locks up against
the front frame of
the oven cavity, to
the Locked
position,
5. Close the oven Sealed Hinge
door, Arm
TO CLEAN OUTSIDE OF DOOR
• Use soap and water to thoroughly
clean the top, sides, and front of the
oven door. Rinse well You may also
use a glass cleaner to clean the
glass on the outside of the door
Do not let water drip into the vent
openings.
o Spillage of marinades, fruit juices,
tomato sauces, and basting
materials containing acids may
cause discoloration and should
be wiped up immediately. When
surface is cool, clean and rinse.
o Do not use oven cleaners, cleaning
powders, or harsh abrasives on the
outside of the door
if any stain on the door vent trim
is persistent, use a soft abrasive
cleaner and a sponge scrubber
for best results
TO CLEANINSIDEOFDOOR
• Because the area inside the gasket
is cleaned during the self-clean
cycle, you do not need to clean
this by hand
• The area outside the gasket and
the door liner can be cleaned with
a soap-filled pad, hot water, and
detergent. Rinse well with a vinegar
and water solution
24
Loading ...
Loading ...
Loading ...