Loading ...
Loading ...
Loading ...
ASSEMBLY
SNOW CHUTE ASSEMBLY
1. Position the snow chute onto the snow chute flange. Al-
ign the three holes in the snow chute with holes in snow
chute flange. (See Figure 4)
2. Place three 5/16-18 carriage bolts from inside of chute
as shown in Figure 4. (hardware is found in parts bag) Nut
3. Place three 5/16-18 flatwashers and three 5/16-18 nuts
on outside of flange.
4. Tighten all four carriage bolts securely.
NOTE: DO NOT overtigten carriage bolts.
Snow Chute Deflector,
Chute Extension
Flange _
Bolts
Not Remove
Hardware Figure 4
F_01136J 8
Loading ...
Loading ...
Loading ...