Loading ...
Loading ...
Loading ...
¢leanin i
Self-Clean Oven
To set Self=Clean:
Notes:
. Oven temperature must be below 400°F to program a
clean cycle.
. In double wall oven models, only one oven can be
cleaned at a time.
The self-clean cycle usesabove-normal cooking temperatures to
automatically clean the oven interior.
The oven should be cleaned regularly by wiping up spillovers
to prevent excessive smoke and flare-ups. Do not allow a
heavy build-up of soil to accumulate in the oven.
During the cleaning process, the kitchen should be well venti-
lated to get rid of normal odors associated with cleaning.
Before Self=Cleaning
1. Remove broiler pan, all pans, and oven racks from the oven.
The oven racks will discolor and may not slide easily after a
self-clean cycle if they are not removed.
2. Clean oven frame, door frame (area
outside of gasket, and around the
opening in the door gasket) with a
nonabrasive cleanersuch asBon AmP
or detergent and water. The self-
cleaning process does not clean these
areas. They should be cleaned to
prevent soil from baking on during the clean cycle. (:The
gasket is the seal around the oven door and window).
3. To prevent damage, do not clean or rub the gasket around the
oven door. The gasket is designed to seal in heat during the
clean cycle.
4.
Wipe up excess grease or spillovers from the oven bottom.
This prevents excessive smoking, flare-ups or flaming during
the clean cycle. To make cleaning easier, the heating element
can be lifted slightly (about 1 inch).
5.
Wipe up sugary and acidic spillovers such as sweet potatoes,
tomato, or milk-based sauces. Porcelain enamel is acid-
resistant, not acid-proof. The porcelain finish may discolor if
acidic or sugary spills are not wiped up before a self-clean
cycle.
1. Close the oven door. /_\
2. Press the Clean pad.
. The CLEAN icon flashes.
. "SET" flashes in the display. Autoset
3. Press the Autoset pad.
."MEd" (Medium Soil, 3 hours) is displayed.
4. Press the Autoset pad to scroll through the self-cleaning
settings.
"HVy" (Heavy Soil, 4 hours)
"MEd" (Medium soil, 3 hours)
"LifE" (Light Soil, 2 hours)
Choosing the soil level of the oven automatically programs
the self-cleaning time.
5. After four seconds, the oven will start cleaning.
If the door is not closed, beeps will sound and 'door' will
display. If the door is not closed within 30 seconds, the
self-cleaning operation will be canceled and the display
will return to the time of day.
The CLEAN icon will appear in the display.
The LOCK icon will flash in the display. Once the
door locks, the icon will remain steady.
The cleaning time will start counting down in the display.
To Delay a Self=Clean Cycle:
1. Press the Delay or Delay 1 pad (select models)
The DELAY icon flashes.
. 00:00 will flash in the display. Delay 1
2. Enter the amount of time you want to delay the cycle using
the appropriate number pads.
3. Press the Clean pad. _,_"-,_
SETflashes in the display.
4. Press the Autoset pad.
Autoset
. "LifE" (Light soil level) is displayed.
* Brand names for cleaning products are registered trademarks of the respective manufacturers.
Loading ...
Loading ...
Loading ...