Loading ...
Loading ...
Loading ...
WARHIHG
The high pressure stream of water that this
_ quipment produces can cut through skin and its
underlying tissues, leading to serious injury and
)ossible amputation.
* NEVERconnecthighpressurehoseto nozzleextension.
. Keephighpressurehoseconnectedto pumpandspraygun
whilesystemis pressurized.
. Alwaysbecertainspraygun,nozzlesandaccessoriesare
correctlyattached.
2. Attach other end of high pressure hose to high pressure
outlet on pump. Tighten by hand.
3. Before connecting garden hose to water inlet, inspect
inlet screen (A). Cleanscreen if it contains debris or have
it replacedif damaged. DO NOTrun pressurewasher if
inlet screenis damaged or missing.
4. Run water through garden hose for 30 seconds to flush
it of debris. Turn off water.
IMPORTANT:DO NOTsiphon standing water for the water
supply. Use ONLY cold water (less than IO0°F).
5. Connect garden hose (not to exceed50 feet in length) to
water inlet. Tighten by hand.
NOTICE
Using a OneWay Valve (vacuum breaker or check valve)at
pump inlet can cause pump or inlet connector damage.
ThereMUSTbeat leastten feet of unrestrictedgardenhose
betweenthe pressurewasherinletand anydevice,suchas a
vacuumbreakeror checkvalve.
Damageto equipmentresultingfrom failureto follow this
instructionwill void warranty.
6. Turn ON the water, press red button (B) on the gun and
squeezethe trigger to purge the pump system of air
and impurities.
WARHIHG
m
Risk of eye injury.
_Spray can splash back or propel objects.
Alwayswearsafetygoggleswhenusingthis equipmentor in
vicinityof whereequipmentis in use.
Beforestartingthe pressurewasher,besureyouare wearing
adequatesafetygoggles.
NEVERsubstitutesafetyglassesfor safetygoggles.
ChecklistBefore Starting E.gi.e
Reviewthe unit to ensure you have performed all of the
following:
1. Besure to read Safety Rubs and Operationsections
before using the pressure washer.
2. Makesure handle is in place and secure.
3. Attach battery to handleand makethe connection.
4. Checkthat oil has beenadded to proper level in engine
crankcase.
5. Add proper fuel to fuel tank.
6. Checkfor proper hose connections (high pressure and
water supply) and that there are no kinks, cuts, or
damageto the high pressure hose.
7. Provide proper water supply (not to exceed IO0°F).
Battery Float Charger
Usebattery float charger jack to keepthe starting battery
charged and readyfor use. Battery charging should be done
in a dry location, such as inside a garage.
1. Plug charger into unit's "Battery FloatCharger" jack (C),
which is located next to the key start. Plug battery
charger into a 120 Volt AOwall receptacle.
/ /_ _©
2. Unplugcharger from unit and walloutlet when pressure
washer is being started and while it is in operation.
3. Keep this charger plugged in when pressure washer is
not in use to prolong battery life. The charger has a built
in float equalizer and will not overcharge the battery,
even when plugged in for an extended period of time.
IMPORTANT:See Battery Maintenancefor additional
information.
WARHIHG
Batteryposts,terminals and related accessories contain
lead and lead compounds- chemicalsknownto the State of
California to causecancerand reproductiveharm.
Wash handsafter handling.
10
Loading ...
Loading ...
Loading ...