Loading ...
Loading ...
Loading ...
m
1.
2.
Adjust the width of the flue mounting bracket
assembly to equal the inside width of decorative flue.
Insert and tighten mounting screws (3,9 x 6 ram) to
hold bracket width.
Use mounting screws (4,8 x 38 ram) and wall
anchors to secure flue mounting bracket to the ceiling
as shown.
3. Use 6" round damper / duct connector to 6" discharge
on hood.
4. Attach 6" round metal duct to connect the duct collar
on the hood to the ductwork above.
5. Use duct tape to make all joints secure and air tight.
6. Insert the decorative flues setting them on the hood.
FLUE MOUNTING
BRACKET ASSEMBLY
J
MOUNTING
SCREWS (3,9x6mm)
WALL
ANCHORS
MOUNTING
SCREWS
7.
Extend the upper flue to the ceiling and secure with
two mounting screws (3,9 x 9,5 ram).
OEOORAT,VE
FLUE
DUCT TAPE:iii:i::i:iii:iii:iii:ii /
FASTEN FLUE TO
_UPPER BRACKET
_ WITH MOUNTING SCREWS
UPPER
FLUE
LOWER
FLUE
LOUVERS ON
UPPER FLUE
(Smide down,
inside of lower
flue)
(b
{b
m
Loading ...
Loading ...
Loading ...