Loading ...
Loading ...
Loading ...
m
NOTE: To reduce the risk of fire, use only metal
ductwork.
1. Decide where the ductwork will run between the hood
and the outside.
2. A straight, short duct run will allow the hood to perform
most efficiently.
3. Long duct runs, elbows, and transitions will reduce
the performance of the hood. Use as few of them as
possible. Larger ducting may be required for best
performance with longer duct runs.
4. Install a roof or wall cap. Connect round metal
ductwork to cap and work back towards hood
location. Use duct tape to seal the joints between
ductwork sections.
ROOF CAP
,\
6" ROUND
DUCT
DECORATIVE
WALL
FLUE _ CAP
HOOD
24" TO 30" ABOVE
COOKING SURFACE
6"
ROUND
ELBOW
1. Construct wood wall framing that is flush with interior
surface of wall studs.
Make sure:
a) the framing is centered over installation location.
b) the height of the framing will allow the mounting
bracket to be secured to the framing within the
dimensions shown.
2. After wall surface is finished secure mounting
bracket to framing using dimensions shown.
NOTE:
On 8' ceilings, the hood distance above cook top is
minimum 24", maximum 27".
On 9' ceilings, the hood distance above cook top is
minimum 28", maximum 30".
FRAMING BEHIND DRYWALL
/
36=3/4"= bottom of hood 24" above eooktop
42=3/4"= bottom of hood 30" above eooktop
C3
O
::3
::3
m
7
Loading ...
Loading ...
Loading ...