Loading ...
Loading ...
Loading ...
Assist en
15
a Once the dish is ready, a signal sounds. The appli-
ance stops heating. In the display, the current core
temperature is the same as the set core temperat-
ure, e.g. 75°C|75°C.
6.
WARNING‒Risk of burns!
The cooking compartment, accessories and meat
probe become very hot.
▶
Always use oven gloves to remove hot accessor-
ies and the meat probe from the cooking com-
partment.
When the core temperature is reached:
‒ Press to switch the appliance off.
‒ Pull the meat probe out of the socket in the
cooking compartment.
‒ Pull the meat probe out of the food and remove
it from the cooking compartment.
Changing the temperature
1.
After the start of the operation, the core temperature
is highlighted in white. You can use the control ring
to change the core temperature directly.
2.
To change the cooking compartment temperature,
press "Temperature" and use the control ring to
change the cooking compartment temperature.
Changing the type of heating
When you change the type of heating, the other set-
tings will also be reset.
1.
Press to pause operation.
2.
Press "Types of heating".
3.
Press the type of heating that you want to use.
a The corresponding default temperature appears in
the display.
11.4 Core temperatures of different foods
Here you can find the suggested core temperatures of
various different foods.
These suggestions depend on the quality and the size/
shape of the food. Do not use frozen food.
Food Core temperature
in °C
Poultry 75
Pork 75
Beef, rare 50
Beef, medium 60
Beef, well done 70
Lamb 70
12 Assist
The "Assist" operating mode helps you to use your ap-
pliance to prepare different dishes by selecting the op-
timum settings automatically.
12.1 Cookware
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300°C. Glass or
glass ceramic cookware is best. The joint should cover
approx. two thirds of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
12.2 Settings for the dishes
To make the dishes perfectly, the appliance uses differ-
ent settings.
Note:The cooking result depends on the quality and
composition of the food. Use fresh and, ideally, chilled
food. Use frozen food straight from the freezer.
Tips and information about the settings
If you set a dish, the display shows relevant information
for this dish, e.g.:
¡ Suitable shelf position
¡ Suitable accessory or cookware
¡ Added liquid
¡ Time for turning or stirring
When this time is reached, a signal sounds.
To call up the information, press "Tip" or . Some notes
are displayed automatically.
Programmes
The ideal type of heating, temperature and cooking
time are preset for programmes.
In order to obtain an optimal cooking result, you must
also set the weight. Unless otherwise indicated, set the
total weight for your dish. You can set the weight only
in the intended range.
Recommended settings
For the recommended settings, the optimum type of
heating is preset. The display shows the type of heat-
ing.
You can adjust the preset temperature and the cooking
time.
Meat probe
You can use the meat probe for several dishes.
If the meat probe is plugged in, only the dishes that are
possible with the meat probe are available for selec-
tion. For each dish, you receive recommended settings
for type of heating, temperature and core temperature.
You can adjust the temperature and the core temperat-
ure.
→"Meat probe", Page14
Baking sensor
The appliance automatically bakes some dishes with
the baking sensor.
appears in the display. You do not have to imple-
ment any further settings.
Observe the information about the baking sensor.
→"Dishes with baking sensor", Page16
Loading ...
Loading ...
Loading ...