Loading ...
Loading ...
Loading ...
BLY
INSTALL MOWER AND DRIVE BELT
(See Figs. 4 and 7)
Be sure tractor is on level surface and mower suspension
arms are raised with attachment lift control Engage park-
ing brake,
, Cut and remove tie down securing anti-sway bar
Swing anti-sway bar to left side of mower deck,
• Slide mower under tractor with discharge guard to right
side of tractor.
IMPORTANT; CHECK BELT FOR PROPER ROUTING iN
ALL MOWER PULLEY GROOVES. INSTALL BELT INTO
ELECTRIC CLUTCH PULLEY GROOVE
o Install one front link intop hole of the LH. front mower
bracket and L.H. front suspension bracket. Retain with
two single loop retainer springs as shown.
o Install second front linkin R.H. front suspension bracket
and retain with single loop retainer spring as shown
• Slide right side of mower deck back and install link in
top hole of R.H. front mower brackeL Retain with single
loop retainer spring as shown.
• Turn height adjustment knob counterclockwise until it
stops.
o Lower mower linkage with attachment lift control
° Place the suspension arms on inward pointing deck
pins. If necessary, rock and raise front of mower to
align deck pins with the holes in suspension arms.
Retain with double loop retainer springs,
° Connect anti-sway bar to chassis bracket under left
footrest and retain with double loop retainer spring.
• Turn height adjustment knob clockwise to remove
slack from mower suspension.
• Raise deck to highest position_
• Assemble gauge wheels as shown using long shoulder
bolts, 3/8 washers, and 3/8-16 center Iockn uts.Tighten
securely.
= Ad ust gauge wheels before operating mower asshown
in the Operat on sect on of th s manua.
CHECK DECK LEVELNESS
For best cutting results, mower housing should be properly
leveled. See 'q'O LEVEL MOWER HOUSING" in the
Service and Adjustments section of this manual.
CHECK FOR PROPER POSITION OF ALL
BELTS
See the figures that are shown for replacing motion, mower
drive, and mower blade drive belts in the Service and
Adjustments section of this manual Verify that the belts are
routed correctly.
SUSPENSION FRONT
ARMS LINKS
FRONT
SUSPENSION
BRACKET
CHASSIS
BRACKET
DOUBLELOOP
RETAINER SPRING
DOUBLE LOOP
RETAINER SPRING
(Inward pointing
deck pins)
LECTRIC
CLUTCH
PULLEY ,
L.H. GAUGE
WHEEL BAR
SHOULDER
BOLT
GAUGE
WHEEL
3/8-16
CENTER
LOCKNUT
ANTI-SWAY
BAR
3/8WASHER
IDLER
PULLEY
FRONT
SUSPENSION
BRACKET
SINGLE
LOOP RETAINER
SPRINGS
BRACKET
FIG, 4
GUARD
9
Loading ...
Loading ...
Loading ...