Loading ...
Loading ...
Loading ...
LY
INSTALL BATTERY (See Figs. 5 and 6)
CAUTION: Do not short battery termi-
nals. Before installing battery, remove
metal bracelets, wristwatch bands,
rings, etc.
Positive terminal must be connected
first to prevent sparking from acciden-
tal grounding.
o Lift hood to raised position.
° Be sure battery drain tube has not come loose and is
securely attached to drain in battery tray.
• Lower battery into battery tray with terminals to front of
tractor.
• Position terminal guard overbattery and install battery
bolts through guard mounting holes and into threaded
fasteners on support plate.
o Tighten battery bolts securely, but do not over tighten.
= Open terminal access doors.
° First connect RED battery cable to positive (+) battery
terminal with hex bolt, flat washer, lock washer and hex
nut as shown, Tighten securely.
° Connect BLACK grounding cable to negative (-) battery
terminal with remaining hex bolt, flat washer, lock
washer and hex nut,, Tighten securely.
= Close terminal access doors.
Use terminal access doors for:
o Inspection for secure connections (to tighten hard-
ware).
° Inspection for corrosion.
= Testing battery.
o Jumping (if required),,
o Periodic charging.
:_::_i:;_:-•"_::;: '': F TERMINAL
. F /... <_>_.__ GUARD
SA ERY
-: BOLTS
. U I _BATTERY
THREADED F] :il_ ;'_ _ TRAY
DRAIN TUBE
FIG. 5
LOCK FLAT WASHER
WASHER
RE .UT
DOOR
: "1 _- ------ POSITIVE
...... NEGATIVE
' ..... " (BLACK)
CABLE
FIG. 6
,/CHECKLIST
BEFORE YOU OPERATE AND ENJOY YOUR NEW
TRACTOR, WE WISH TOASSURE THAT YOU RECEIVE
THE BEST PERFORMANCEAND SATISFACTION FROM
THIS QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST:
,/ All assembly instructions have been completed.
,/ No remaining loose parts in carton_
,/ Batteryis properly prepared and charged. (Minimum
1 hour at 6 amps).
J Seat is adjusted comfortably and tightened securely.
,/ All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory).
,/ Be sure mower deck is properly leveled side-to-side/
front-to°rear for best cutting results° (Tires must be
properly inflated for leveling).
,/ Checkmoweranddrivebeltso Besuretheyarerouted
properly around pulleys and inside all belt keepsr's.
,/ Check wiring. See that all connections are still secure
and wires are properly clamped.
WHILE LEARNING HOW TO USE YOUR TRACTOR,
PA YEXTRA ATTENTION TO THE FOLLOWING IMPOR-
TANT ITEMS:
,/ Engine oil is at proper level
,/ Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
,/ Become familiar with all controls - their location and
function. Operate them before you start the engine.
,/ Be sure brake system isin safe operating condition.
10
Loading ...
Loading ...
Loading ...