Loading ...
Loading ...
Loading ...
©OIL, @LID LIIII NT AND
IlllllV
OP£I'I COIL, SOLID AIID IADIAHT
IIODULE$
Inserting and Removing a Module
To insert a Module:
1. Be sure the controls are off and the unit is cool, clean
and dry.
2. Grasp the module firmly, slide it into the well and fit
the plug intothe receptacle. Do not holdthe opposite
side of the module too high or the plug may be
damaged.
3. Use the fingergrip to lower the module into the well.
TO ren'_ove a Module:
1. Be sure the controls are off and the unit is cool, clean
and dry,
2. Use the fingergrip to raise the module so you can
grasp it firmly.
3. Raise the module up to clean the cooktop and pull the
module away from the receptacle.
IIEPLACII ,IGTill OVIIN LIGHT
Be sure that the light switch is in the off position,
Do not touch hot even buib. Do not touch oven
bui_ with wet hands. Do not wipe oven light area
with wet cmoth.
Never touch the electrically live collar on the
bulb when replacing it.
Electrica! power must be shut off if you have to
replace a broken bulb.
t. Unscrew glass cover and remove,
2. Replace the bulb with a 40 watt appliance bulbo
3. Replace thRcover.
0____. GLASS
J_ RETAINER
BULB._ "-...
Note: We recommend you use a 40 watt appli-
ance bulb that is no longer than 3 1/2",
Bulbs are available at your nearest Sears
Service Center.
GLASS_
COVER
18 NEMNT28
Loading ...
Loading ...
Loading ...