Loading ...
Loading ...
Loading ...
,F::S,©tL_rI BI ©Y©I.I
1. Remove the broil pan and g rid, oven racks, all utensils
and any foil that may be in the oven. Do not try to
clean utensils or any other objects in the oven during
a self-clean cycle. I]f oven _'ac_s _ve le_ in the
_'a_ge du_'_ng a clean cyclle, they w_Ill _arken_
t]oSe _he_r l]us_er _nd beceme ha_'d to s_ide, if
you choose to leave the racks in the oven, you can
polish the edges of the racks with steel wool and
apply a small amount of vegetable oil to the rack
edges after the self-clean cycle, This will make the
racks easier to slide,
2. Soil on the oven front frame and the door liner outside
the door seal and the front edge of the oven cavity
(about 1" into the oven) will not be cleaned during a
clean cycle (see illustration below). Clean these
areas by hand before starting a clean cycle.
Use hot water with a soap-filled steel wool pad, then
rinse well.
No matter how stubborn the stain, never use harsh
abrasive cleaners_ They could permanently damage
the enamel surface° We recommend a cleanser such
as 'Soft Scrub®' brand or a similar cleaning product
to keep white surfaces looking clean and new. After
cleaning, rinse well with a vinegar and water mixture°
This will help prevent a brown residue from forming
when the oven is heated. Buff these areas dry with a
dry cloth.
FRONT FRAME
good baking results. If you notice the seal becoming
worn, frayed or damaged in any way or if it has
become displaced on the door, you should have the
seal replaced°
CYCL
After a clean cycle, you may notice some white ash in the
oven. Just wipe it up with a damp cloth°
If white spots remain, remove them with a soap-filled
steel wool pad. Be sure to rinse thoroughly with a
vinegar and water mixture. These deposits are usually
a salt residue that cannot be removed by the clean cycle.
if the oven is not clean after one clean cycle, the cycle
may be repeated.
QUESTI ON$ AIRE) ANSWERS
Q. if my oven control is not working, can Istill selFclean
my oven?
A. No. Your OVEN CONTROL is used to program the
oven to start and stop the self-cleaning cycle,
Q. Can t use commercial oven cleaners on any part of
my self-cleaning oven?
A. No cleaners or coatings should be used on or around
any part of this oven.
Q.
A.
Can !clean the woven gasket around the oven door?
You can soak itwith hydrogen peroxide as explained
in the Cleaning Tips section of this manual. Be
careful not to rub, move, or damage the gasket.
Q. Is it normal to hear "crackling sound" during clean-
ing?
A, Yes, This is the metal heating and cooling°
Q. Why do i have ash left in my oven after cleaning?
A_ Some types of soil will leave a deposit, it can be
removed with a damp sponge or cloth.
DOOR
DOOR LINER
Q_
A.
Q_
A.
What should Ido if excessive smoking occurs during
cleaning?
This iS caused by excessive soil and you should
press CANCEL, Open windows to rid room of smoke,
Allow the oven to cool for at least one hour before
opening the door, Wipe up excess _oll an_i re_e[ tlire
clean cycle,
Should there be any odor during the cleaning?
Yes, there may be a slight odor during the first few
cleanings. Failure to wipe out excessive soil might
also cause an odor when cleaning.
3, Wipe up heavy spillovers on the oven bottom, Too
much soil may cause smoking during the clean cycle.
4. Do not rub or clean the door seal, The fiberglass
material of the seal has an extremely low resistance
to abrasion. An intact and well fitting oven door seal
is essential for energy efficient oven operation and
12
NESCL18-I
Loading ...
Loading ...
Loading ...