Loading ...
Loading ...
Loading ...
3.Openandremovetheservicecover.
4. Loosenthescrewsandremovetheprotectivefilm.
6.Turnthepumpcovercounterclockwiseto removeit.A
smallamountof residualwatermayflowoutwhenthe
coveris removed.
Cleantheinteriorof the pumphousing,removingany
debrisor foreignobjects.Checkto be surethe
impellerwheelatthebackof thepumphousingcan
nowturnfreely.
Removeanylint,debrisor detergentresiduefromthe
threadsof thepumpcoverandthepumpcover
housing.
Replacethepumpcoverbyscrewingtightlyinto
position.Handlemustbe vertical.
7. Reinstallthe protectivefilmoverthepumpaccess
usingbothscrews.
5. Use the pull-out drain hose located in the pump
access opening to drain the remaining water into a
suitable container (up to 5.3 U.S. gallons/20 liters of
water may be drained). Pull the sealing cap from the
hose and lay the hose over the side of the container
and allow the water to finish draining from the drum.
When finished, replace the sealing cap into the end of
the hose and restore the hose to its storage location.
........ _i_ilI ;ii
, !iii ,i:iii! iΒΈ
8. Snap the service cover in place at the hinges and
close it.Wipe up any spilled water.
NOTICE: In order to prevent detergent from flowing
unused into the drain during the next wash cycles: pour
0.26 U.S. gallons/1 liter water into the chamber II.
Turn the cycle selector to the Drain and touch the Start/
Pause button.
30
Loading ...
Loading ...
Loading ...