Loading ...
Loading ...
Loading ...
Procedure for adjusting the washer feet:
1. After determining which washer feet need to be
extended, have someone lift up on the washer slightly
to take pressure off the foot to be adjusted.
2. Turn the grey plastic foot to extend it downward as far
as necessary to raise the corner of the washer the
correct amount to level the washer.
3. When the height of the foot is correct, use a 17 mm
open end wrench to tighten the Iocknut against the
washer bottom. The Iocknut should be tight against the
bottom of the washer to lock the foot in place.
Electrical connection
• , WARNING
ELECTRICAL SHOCK HAZARD
Improper connection of the equipment-grounding
conductor may result in electric shock. Have the
appliance checked by a qualified technician or
licensed electrician if you are in doubt as to whether
the washer has been properly grounded.
• , WARNING
ELECTRICAL SHOCK HAZARD
To reduce the risk of fire or electrical shock, DO
NOT use an extension cord or an adapter to
connect the washing machine to the power supply.
Grounding Instructions
• , WARNING
ELECTRICAL SHOCK HAZARD
This appliance must be grounded. In the event of
malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of least
resistance for the electric current. This appliance is
equipped with a cord that has an equipment
grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that
is properly installed and grounded in accordance
with all local codes and ordinances.
o Do not modify the plug provided with the appliance. If
the plug will not fit into the outlet have a properly
grounded outlet installed by a qualified electrician. Do
not cut, remove or bypass the grounding prong on the
washer power cord plug.
o The washer power cord plug must be easily
accessible when the washer is operating.
o When unplugging or plugging in the washer power
cord, grasp the plug end. Do not pull on the cable to
unplug the washer.
o The household electrical supply must be suitable for
the voltage specification shown on the washer rating
plate (located inside the washer door, immediately
below the drum opening).
---> Purchase information; Page 4
See the table below for connection specfications and
fuse/breaker requirements.
Volts Hertz Ampers Watts
240 60 12 2.880 max.
• , WARNING
ELECTRICAL SHOCK HAZARD
To reduce the risk of electrical shock:
o Only pull out the power cord by the plug end and
never by the cable, as this could damage it.
o Never touch or hold the plug end or power cord
with wet hands.
o Never unplug the plug end or power cord during
operation.
16
Loading ...
Loading ...
Loading ...