Coway AP-1515G Airmega 300S App-Enabled Smart Air Purifier

User Manual - Page 7

For AP-1515G. Also, The document are for others Coway models: 400S, 400, 300S, 300

PDF File Manual, 36 pages, Read Online | Download pdf file

AP-1515G photo
Loading ...
Loading ...
Loading ...
EN
Remove the power plug from the electric outlet by
grasping the power plug and pulling it gently. Never
pull the cord to remove the power plug.
Keep the electric cord away from heat sources.
Do not repair the product unless this manual
recommends it. Doing so will void your warranty.
All repair work must be carried out by a qualified
technician.
This product has a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
Do not use this product in industrial areas or factories
where oil, grease, or dust particles may be present. This
product is for household use only.
Do not change the filter while the product is operating.
Always turn off the product and unplug the power plug
before accessing the components inside the product.
Do not place the product near a humidifier or in humid
areas, such as bathrooms or laundry rooms, where the
product may come into contact with water.
Do not place the product near flammable gases,
cigarettes, incense, and other combustible materials.
Do not place the product on a bed or against soft
objects, such as curtains.
Do not clean the product using detergents, paint
thinner, or other household solvents.
Do not spray insecticides or other flammable materials
near the product.
This product contains a chemical known to the State
of Califonia to cause cancer and birth defects or other
reproductive harm.
(California law requires this warning to be given to
customers in the State of California)
CAUTION
This product should not be used by children under 8
without supervision.
This product should not be used by persons with
reduced physical, sensory, or mental capabilities or
lack of experience without supervision or instruction
concerning to the use of the product in a safe way and
understand the hazards involved.
Do not allow children to play with the plastic wrapping
and product.
Do not use this product with any solid-state speed
control device, as it may result in electric shock or fire.
Do not use an adapter or extension cord, as it may
cause fire, shock, or personal injury.
Do not use attachments or filters not recommended by
the manufacturer.
Exercise caution while removing the components from
the product. Ensure that your body parts do not get
stuck or scratched while servicing the product.
Do not insert any objects or finger into the openings
of the product. If any objects fall into the openings,
immediately turn off the product and unplug the
power plug. Contact a qualified technician or the
manufacturer to remove the object.
Do not wash or reuse the Max2 filters.
Do not block the air outlet of the product. Doing so may
decrease the efficiency of the product and increase the
risk of injury.
This product is for household use as described in this
manual. Using it in an industrial environment or any
other place not recommended by the manufacturer
and may result in electric shock, fire, and injury to
person.
Do not place anything on top of the product.
Do not run the power cord under carpets or cover it
with rugs.
Change the filters at the recommended intervals so that
excess dust does not accumulate.
Do not place the product where the both sides of
product are blocked.
Do not place the product in direct sunlight.
Do not place the product next to or on windows.
Place the product on a firm, flat, and dry surface that
provides sufficient air circulation.
Keep the product and its cord out of way, where it
cannot be stepped on or tripped over.
The end user has to be informed to keep at least 20 cm
separation with the antenna while this end product is
installed and operated.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.

Loading ...
Loading ...
Loading ...