Loading ...
Loading ...
Loading ...
Maintenance
The engine brake Cable should always be
adjusted to stop the engine within 3 sec.
CAUTION! For adjustment contact your
authorized service dealer.
At the End of the Mowing Season
1. Replace blade, bolts, nuts or screws, if necessary_
2. Clean your lawnmewer thorough_
3. Ask your local service dealer to clean the air
filter thoroughly and carry out any service or
repairs required.
4. Drain engine of oil and gasoline.
Storing your Lawnmower
1. DO nct stere your lawnmower immediately after use.
2. Wait uatil the engine has cooled to avoid a
potential fire hazard.
3. Disconnect the spark plug lead.
4. Clean your lawnmower
5. Loosen handle adjusters (A2) on both sides of
the product and fold the handJe forward.(i)
6. Store in a cool, dry p_aee where your lawnmower
is protected from damage.
Service Recommendations
Your product is uniquely identified by a silver and
black product rating label.
We strongly recommend that your product is
serviced at least every twelve months, mare often in
a professional app_ie_on.
Engine Maintenance Schedule
Fellow the hourly or calendar intervals, whichever
occur first. More frequent service is required when
operating in adverse conditions
First 5 hours = Change oil.
Every 5 hours or daily - Check oiJ leve_ Clean
finger guard. C_ean around muft_e_
Every 25 hours or every season = Change oil if
operating under heavy lead or high ambient
temperature. Service air cleane_
Every 50 hours or every season = Change oil.
Inspect spark arrester, if equipped.
Every 100 hours or every season = Clean cooling
system*. Replace spark p_ug.
C_ean mere often under dusty conditions, or
when airborne debris is present or after
proJonged opera, on cutting tall, dry grass.
Engine Servicing & Guarantee
The engine fitted to your tewnmower is
guaranteed by the Engine Manufacturer. TO
obtain further information contact your dealer`
Trouble Shooting
Engine Will Not Start
1. Ensure OPC Lever is in the start position.
2. Check that the control lever is in the '+' position
3= Check that there is sufficient fuel in the tank
and the cap air vent is clear.
4. Remove and dry the spark plug.
5= Gasoline may be state, replace. Once gasoline
has been replaced, It may take a {ltfte time for
fresh gasoline to filter through.
6. Check that the blade bolt is tight. A loose bolt
could cause difficult starting.
7. If the engine will still not start_ immediately
disconnect the spark plug lead.
8= CONSULT YOUR LOCAL APPROVED
SERVICE DEALER.
Lack of Engine Power and/or Overheating
1_ Check that the control lever is in the 'normal'
position.
2. Disconnect the spark plug lead and allow the
engine to cool down.
3= Clean grass clippings and debris from around
the engine and air inlets and the underside of
the deck inciudtsg the chute.
4. Clean the engine air filter (Ask your local
Approved Service Dealer to clean the engine air
filter thoroughly).
5. Gasoline may be stale, replace. Once gasoline
has been replaced, It may take a liftle time for
fresh gasoline to fitter through.
6. If the engine still lacks power and/or is
overheating_ Immediately disconnect the
spark plug lead.
7. CONSULT YOUR LOCAL APPROVED
SERVICE DEALER=
Excessive Vibration
1. Disconnect the spark plug tend.
2. Check that the blade is correctly fitted.
3. If the blade is damaged or worn replace it with
a new one.
4. If vibration persista_ immediately disconnect
the spark plug lead.
5. CONSULT YOUR LOCAL APPROVED
SERVICE DEALER.
Environmental Information
Electrolux Outdoor Products are manufactured
under an Environmental Management System (ISO
14001) using, where practical, components
manufactured in the most environmentally
responsible manner, according to company
procedures, and with the pctential for recycling at
the end Of the products' lifo.
• Packaging is recyctable and p_astie components
have been labelled (where practical) for
eategodsed recycling.
• Awareness Of the environment must be
considered when disposing of 'end-of=life'
product.
• If necessary, contact your local authority for
disposal information.
DISPOSAL OF FUELS AND LUBRICATING OILS
• Wear protective clothing when handling any fuels
and lubricants.
• Avoid contact with skin.
• Remove gasoline and engine oil before
transporting the product.
• Contact your local authority far information of
your nearest Recycling/Disposal Station.
• DO NOT dispose of used faels/oils with
household waste
• Waste fuels/oils are harmful, but can be
recycled and should be disposed of through
the recognised facilities.
• DO NOT dispose of used fuels/oils to water.
• Do NOT incinerate
[]
Loading ...
Loading ...
Loading ...