Loading ...
Loading ...
Loading ...
TURNTABLE INSTALLATION
a.
Never place the glass tray upside down. The glass
tray should never be restricted.
b.
Both glass tray and turntable ring assembly must
always be used during cooking.
c.
All food and containers of food are always placed on
the glass tray for cooking.
d.
If the glass tray or turntable ring assembly cracks or
breaks, contact Customer Service.
COUNTERTOP INSTALLATION
Remove all packing material and accessories. Examine the oven for any damage such as dents
or broken door. Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet surface. Do not
remove the light brown Mica cover that is attached to the oven cavity to protect the magnetron.
INSTALLATION
1. Select a level surface that provides
enough open space for the intake and/
or outlet vents.
A minimum clearance of 7.5cm is
required between the oven and any
adjacent walls. One side must be open.
(1) Leave a minimum clearance of
30cm above the oven.
(2) Do not remove the legs from the
bottom of the oven.
(3) Blocking the intake and/or outlet
openings can damage the oven.
(4) Place the oven as far away from radios and TV as possible. Operation of microwave oven
may cause interference to your radio or TV reception.
2. Plug your oven into a standard household outlet. Be sure the voltage and the frequency is
the same as the voltage and the frequency on the rating label.
WARNING: Do not install oven over a range cooktop or other heat-producing appliance. If
installed near or over a heat source, the oven could be damaged and the warranty would be void.
The oven is designed for benchtop use only and must not be placed in a cabinet.
7.5cm
7.5cm
30cm
OPEN
Hub (underside)
Glass tray
Turntable ring assembly
Turntable shaft
Loading ...
Loading ...
Loading ...