Loading ...
Loading ...
Loading ...
17
Power Supply Alarm
If the temperature in the appliance reached the alarm level during the
power outage, then the high temperature alarm will be activated
when power supply is restored. Acoustic alarm will be sounded, and
PF will flash on the display unit B3.
To acknowledge and turn off the acoustic alarm signal, press any
key. The highest measured temperature of the freezer compartment
will be displayed on the B3 display unit, and the B1 symbol will light
up.
The next time you press the B key, the highest measured
temperature of the refrigerator compartment will be displayed, and
the B2 symbol will be lit up.
When you press the B key again, the power supply failure alarm will be finally deactivated, and the
set temperature for the selected compartment will appear on the B3 display unit.
If the high temperature alarm is activated at the same time, it will operate as described in the chapter
High Temperature Alarm, after you have deactivated the power supply failure alarm.
INTERIOR FEATURES
NOTE: Not all features listed in this section may be available in your specific appliance.
Shelves
You can lay out the empty shelves to your liking across the
guides in the refrigerator interior without having to remove
them from the refrigerator.
To move the shelf or take it out from the refrigerator, slightly lift
it at the back, pull it towards you, and then either move it or
take it out of the appliance.
Store quickly perishable food at the back of the shelf where the
temperature is the lowest.
Door Shelves
The interior side of the refrigerator door is fitted with shelves intended for
storing cheese, butter, eggs, yoghurt, and other smaller packages, tubes,
cans etc.
You may arrange the shelves as desired by lifting them slightly from the
grooves that hold them in place and moving them to the desired spot, making
sure to fit them in the grooves there.
The bottom shelf is intended for storing bottles.
Maximum load on each door shelf is 5 kg.
2
1
Loading ...
Loading ...
Loading ...