Loading ...
Loading ...
Loading ...
20
SPARK PLUG
Spark plug gap : 0.6mm-0.8mm(0.024-0.031 in). Spark plug tighten torque:
12.5N.m
The spark plug is important for proper engine operation. A good spark plug should be intact, free of
deposits, and properly gapped. Refer to Recommended Maintenance Schedule. To inspect the spark plug:
1. Clean any dirt from the spark plug cap and spark plug base.
2. Remove the cap (a) and the spark plug cap (b), Insert the tool through the
hole from the outside of the cover.
3. Insert the handlebar (c) into the tool (d) and turn it counterclockwise to
remove the spark plug.
4. Check for discoloration and remove the carbon. The porcelain insulator
around the center electrode of spark plug should be a medium-to-light tan
color.
CAUTION: Only use recommended spark plug or equivalent. Do not use spark plugs that have
improper heat range.
FUEL TANK FILTER
WARNING: Never use the gasoline while smoking or in the
vicinity of an open flame.
1. Remove the fuel tank cap and filter.
2. Clean the filter with gasoline.
3. Wipe the filter and install it.
4. Install the fuel tank cap.
Be sure the fuel tank cap is tightened securely.
FUEL FILTER
1.Remove the screws, take the cover down and drain the fuel.
2. Hold and move up the clamp, take off the hose from the tank.
3.Take out the fuel filter.
4. Clean the filter with gasoline.
5.Dry the filter and put it back into tank.
6.Install the hose and clamp, then open the fuel valve to check whether it is leak.
7. Install the cover and tighten the screws.
a
Screws
b
c
d
Loading ...
Loading ...
Loading ...