Loading ...
Loading ...
Loading ...
18
INSTALLATION INSTRUCTIONS
175/8” (448mm)
D
E
Wall mounting installation
After the range hood installation
height has been determined:
1
Draw a horizontal line at a distance
above the cooktop equal to the
desired range hood installation height
plus 151/2” (394mm) (refer to A).
– This line is the mounting location
of the top of the wooden bracket
supplied with the rangehood.
2
Find the centerline of the cooktop.
Draw a vertical line along this
centerline up to the horizontal line
drawn in step
1
(refer to B).
3
The range hood is mounted to the wall
using a wooden bracket supplied with
the range hood (refer to D). Remove
the wooden bracket from the rear of
the range hood. Mark the centerline of
the bracket.
4
Find studs behind the drywall by using
a stud finder. Locate one stud on either
side of the cooktop centerline to use
formounting the wooden bracket (refer
to C).
5
Align the top of the wood bracket along
the horizontal line drawn in step
1
.
Align the centerlines of the bracket and
cooktop (refer to A).
6
Drill a 3” (76mm) deep 1/8” (3mm) hole
through the wooden bracket, drywall and
into the stud.
7
Use the 3” (76mm) screws to attach
the bracket to the wall (refer to A). For
support of longer range hoods, use three
or four studs and screws as available.
Countersink the heads to prevent
interference with the range hood.
8
On the wood bracket, mark the distance
between wall mounting slots (
K
in the
‘Product dimensions’ section) to hang the
range hood (refer to E).
9
Drill two 1/8” (3mm) holes through the
wooden bracket and drywall (these do
not need to go into the studs) (refer toE).
!0
Screw two 3/4” (19mm) screws into the
wood bracket, leaving 1/4” (6mm) of the
screw exposed for hanging the range
hood (refer to E).
A
Cooktop
centerline
Cooking surface
Distance
to cooking
surface
plus 151/2”
(394mm)
Drywall
3” (76mm)
screws
Wood
bracket
(included)
B
Wall studs
C
Loading ...
Loading ...
Loading ...