Loading ...
Loading ...
Loading ...
7
• Upholstery attachment: The fabric can be removed and hand washed with cold water and a gentle
cleanser.
TROUBLESHOOTING
Problem Possible Cause Solution
The steamer is plugged in but not
heating.
The auto shut-o has activated. Press the steam trigger or press
the power button to activate the
steamer.
Not enough steam or no steam is
coming out of the steamer.
The steamer is not heated to full
temperature.
Always allow steamer to preheat
at least 60 seconds, or until the
power button light stops ashing.
There is not enough water in the
water tank.
Fill the water tank.
The water pump hasn’t been
primed.
After preheating, always prime
the water pump by holding the
steam trigger until steam forms.
Discoloured water is coming
through the holes and staining
the fabric.
Residue has built up in the water
tank.
Empty the water tank after each
use. Only use distilled, ltered, or
puried water.
Perfumed or scented additives
were used.
Never use perfumed or scented
additives.
Steamer is leaking or spitting. Steamer is not hot enough. Allow the steamer to heat for
about 60 seconds.
Water tank is running low. Fill the water tank.
Loading ...