Loading ...
Loading ...
Loading ...
6
• To rell at any time during use, turn the steamer o by pressing the power button until the blue
indicator light goes out, unplug from outlet, and follow the above procedure.
• After relling, allow to reheat for 60 seconds and then prime the pump by holding the steam trigger
until steam forms.
USING
• If the label says “do not iron” or shows this icon i, t the delicate attachment and make sure to test
on an inconspicuous area prior to steaming the entire garment.
• If the label says “do not steam” or shows this icon m, do not steam the garment.
1. Hang the garment in an area that will not be aected or damaged by the heat and steam, such as on a
shower curtain rail, or in an open doorway. Alternatively, place the garment on a bed or towel. You can
use the heat resistant bag between the bed/towel and garment if required.
2. Fit any attachment you wish to use.
3. Plug the steamer in then press the power button. The blue power button light will slowly ash,
indicating that the steamer is heating.
4. After about 60 seconds the power light will stay on, indicating your steamer is ready to use.
5. Prime the water pump by holding steam trigger until steam forms.
6. To generate steam, press the steam trigger. As long as the trigger is held, steam will emit from the
steamer. When the trigger is released, the steam will stop.
• To generate a constant ow of steam without holding the trigger, press the steam trigger and then
slide the steam trigger lock downwards. You can then release pressure on the steam trigger. To turn
the steam o, press the trigger, slide the steam trigger lock upwards, then release the trigger.
7. With your free hand keep the fabric taut. Steam the garment with slow, downward strokes, keeping
the head of the steamer in contact with the fabric (Fig. C).
8. When you have nished, press and hold the power button until the blue light goes out (about 3
seconds) and unplug.
• After ironing or between garments, set your steamer down with the handle resting on a at, stable
surface. You can use the heat resistant bag to rest your steamer on (Fig. E).
Ceramic heated plate
Your steamer features a ceramic heated plate that helps smooth out wrinkles and creases on the areas of
garments that are more dicult to reach with steam alone. The temperature of the plate is safe for all
ironable fabrics.
To press garments (collars, cus, etc.) place it on a at, heat resistant surface. Keep the plate in contact with
the garment. Use steam as required. You can use the heat resitant bag to iron on (Fig D).
Important: Always make sure that the surface you use to iron on will not be aected or damaged by heat
or steam!
Auto shut o
If you haven’t used the steam trigger for approximately 8 minutes, your steamer will enter auto shut o
mode. In auto shut o mode, the blue light will ash. To restart your steamer, press and hold the steam
trigger for a few seconds until your steamer begins to steam again and the blue light stops ashing.
CARE AND MAINTENANCE
• When storing or after use, do not wrap the mains cord around the appliance as this can damage the
cord.
1. Make sure steamer is o, unplugged and completely cool.
2. Wipe all surfaces with a clean damp cloth.
3. After the steamer has been thoroughly dried, turn it back on and lightly steam over an old cloth. This
will help remove any residue left in the steam holes.
4. To avoid mineral buildup, empty the tank after each use.
Cleaning attachments
• Fabric attachment: Wipe with damp cloth to clean.
• Delicate fabric attachment: Wash with cold water and small amounts of a gentle cleanser if needed.
The fabric cannot be removed.
Loading ...
Loading ...