Loading ...
Loading ...
Loading ...
22 23
SYMBOLS
T3.15A
Warning symbols on the charger
To reduce the risk of injury, user must read
instruction manual carefully.
The charger is for indoor use only.
Double insulation
Protective 3.15 A limited
WEEE symbol. Waste electrical products should
not be disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or local store for recycling advice.
The product complies with the applicable
European directives and an evaluation method of
conformity for these directives was done.
Model LS G35
Nominal voltage of product with battery 40V
Chain speed 13 m/s
Cutting length 350 mm
Chain type 90PX052X
Guide bar type 44MLEA041(577293)
Weight 3.9 kg
Measured sound pressure level(L
pA
) 89.16 dB(A), K= 3 dB(A)
Measured sound power level(L
wA
) 100.16 dB(A), K= 3 dB(A)
Guaranteed sound power level 103 dB(A)
Vibration a
h
1.207 m/s
2
, K=1.5 m/s
2
Battery pack Model
B0P-SP04-4025ZA
Battery capacity 40 V , 2.5 Ah
Battery charger Model
VDE: B0Q-SP03-4030ZA
BS: B0Q-SP03-4030ZB
Input
230–240 V~, 50/60 Hz 160 W
Output
40 V , 3 A
Protection class II
The sound values have been determined according to noise test code given in EN 60745-2-13, using the
basic standards EN ISO 11094 and EN ISO 3744.
The noise gures quoted are emission levels and are not necessarily safe working levels. Factors that
inuence the actual level of exposure of work-force include the characteristics of the work room, the other
sources of noise, etc. i.e. the number of machines and other adjacent processes, and the length of time
for which an operator is exposed to the noise. Also the permissible exposure level can vary from country.
This information, however, will enable the user of the machine to make a better evaluation of the hazard
and risk. The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures are
necessary. The declared vibration value has been measured in accordance with a standard test method
(according to EN 60745-1) and may be used for comparing one product with another. The declared
vibration value may also be used in a preliminary assessment of exposure.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING:
Depending on the actual use of the product the vibration values can differ from the declared
total! Adopt proper measures to protect yourself against vibration exposures! Take the whole work process
including times the product is running under no load or switched off into consideration!
TECHNICAL DATA
Loading ...
Loading ...
Loading ...