Loading ...
Loading ...
Loading ...
14 15
PRODUCT SAFETY WARNINGS
or storing the chain saw always t the guide bar cover.
Proper handling of the chain saw will reduce the likelihood of
accidental contact with the moving chain saw.
9. Follow instructions for lubricating, chain tensioning and
changing accessories.
10. Improperly tensioned or lubricated chain may either break
or increase the chance for kickback.
11. Keep handles dry, clean, and free from oil and grease.
Greasy, oily handles are slippery causing loss of control.
12. Cut wood only. Do not use chain saw for purposes not
intended. For example: do not use chain saw for cutting
plastic, masonry or non-wood building materials. Use of the
chain saw for operations different than intended could result in
a hazardous situation.
Charger
1. Recharge only with the charger specified by the
manufacturer. Do not use the original charger on other li-ion
batteries or on any other type of battery as this can increase
the risk of re or explosion.
2. Check the battery charger, cable and plug before each
use. Do not use the battery charger if damaged. Do not
open the battery charger yourself; charger must be repaired
by qualied personnel using original spare parts.
3. The charger is designed to use a standard household
220-240 V~ 50Hz power source, ensure that the plug
matches the outlet.
4. Never modify the plug in any way, this will reduce the risk
of electric shock.
5. Do not abuse the cord of charger. Never use the cord for
carrying, pulling or unplugging the charger. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
PRODUCT SAFETY WARNINGS
entangled cords increase the risk of electric shock.
6. Make sure the charger cord is situated so that it will not
be stepped on, tripped over or get damaged.
7. Keep the battery charger clean. Contamination can
increase the risk of electric shock.
8. Protect the battery charger from rain and moisture. If
water accesses the battery charger there is an increased
risk of electric shock.
9. Battery will heat up whilst charging. To reduce the risk of
re, do not operate battery charger on ammable surfaces
such as paper or textiles.
10. The temperature range over which the battery pack
can be charged is typically between 5ºC-45ºC. Attempts
to charge out of the prescribed temperature range may
automatically be blocked by the protection circuitry of the
battery pack. Longest life and best performance can be
obtained if the battery pack is charged at room temperature.
11. Disconnect charger from the power supply when not in
use. This will reduce the risk of electric shock or damage to
the charger.
Battery pack
1. Fully charge battery pack before rst use.
2. Recharge battery pack immediately when the power
output starts to slow.
DO NOT CONTINUE TO USE
PRODUCT WHEN BATTERY LEVEL IS LOW.
3. To prevent serious damage to the battery, charge in
temperatures above 5ºC or below 45ºC. Longest life and
best performance can be achieved when battery is charged
at room temperature.
4. If the battery temperature is above 45ºC wait until
temperature drops before putting it into the charging
station.
Loading ...
Loading ...
Loading ...