Loading ...
Loading ...
Loading ...
EN 3
EN
Revision 11/2019Copyright © 2019, Fast ČR, a. s.
Device and controls
4. MODE button
Switches between video/photo/playback.
5. MicroSD memory card slot
– Inserting the card: Carefully insert the card into the TURNED OFF
DEVICE in the right direction (printed side toward the screen, the gold-
plated contact pads facing forward and into the device, recess in the
card case downwards). Insert the card, for example, using your fingernail
about 1 mm under the surface until you hear a click. The card will fall
into place upon release.
– Card removal: Push the card in, for example, using your fingernail about
1 mm under the surface until you here a click. When releasing the card
from its compartment, hold on to it to prevent it from jumping out.
6. Microphone
7. REC/OK button
Menu selection confirmation button. In normal mode start/stop recording or
photo capture.
8. USB connector
Powering the camera and charging its battery. Do not connect both
connectors at the same time!
9. Data connector for transfer to PC (not to camera)
10. RESET button
Turns off the camera if it becomes unstable or does not respond to control,
e.g. due to excessive heat. Press the button with a thin, blunt object, such as
an open paper clip.
11. Switch 1
Switch the camera on or off by pressing for 4 seconds. You can turn off the
camera using the button only when it is not recording.
12. Speaker
13. Lens
Loading ...
Loading ...
Loading ...