User Manual Sharp RKJ32W Microwave Trim Kit

Documents for Sharp RKJ32W

The following documents are available:
User Manual Photos
RKJ32W photo
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
1
Installation Instructions for SHARP Built-in Kits model number RK-J32W/RK-J32S
Before installing a Sharp Microwave Oven, read carefully this instructions and your Microwave Oven
operation manual.
SAFETY INFORMATION
1. Disconnect the oven from the power supply before installation.
2. To avoid damage caused by heat, do not install directly adjacent to a conventional oven ( in particular
front venting ovens). The manufacture nor the distributors can accept liability for damage to the
microwave oven or built-in kit caused by incorrect installation.
3. Surround
a. Make sure that the Sharp Built-in Kit is the correct surround for your oven.
b. The Sharp Microwave Ovens are designed to either stand neatly on a kitchen counter top or to be
built into a fitted kitchen cabinet using the Sharp Built-in Kits only.
4. Kitchen cabinet
Prepare the kitchen cabinet as follows;
a. The opening in the kitchen cabinet must be of the following dimensions as shown in Fig. 1. To keep
the dimensions is important not only for appearance, but for ensuring the correct ventilation of the
oven. The shelf of the kitchen cabinet should be made to withstand the weight of the microwave oven
to be installed and the heaviest item likely to be cooked in the microwave oven. Refer to the following
Sharp microwave oven weight.
WIDTH HEIGHT DEPTH Applicable oven weight
Kitchen cabinet opening dimensions
560-564mm 403-409mm 489mm (min.) Approx. 17 kg
Built-in kit surround dimensions
596mm 423.4mm
b. Make sure that the back panel (F) is always fitted to ensure correct ventilation of the oven. The
ventilation gap (D) must be 50 mm as shown in Fig. 1 and Fig. 5.
And the ventilation gap (E) must be minimum 550mm as shown in Fig. 1.
c. The dimension from the shelf of kitchen cabinet to the upper cupboard door must be minimum 427
mm as shown in Fig. 2.
5. Fixing
To avoid any possibility of the kitchen cabinet moving when the microwave oven is installed, it is
essential that the kitchen cabinet is fixed to the back wall.
If the appliance is ever removed from the cabinet it should be re-installed in accordance with these
instructions, which should be kept in a safe place for future reference.
PROVIDED PARTS
1
SPACING BRACKET
2
PARTITION ANGLE
4
CUSHION (SIDE)
3
CUSHION (BACK)
6
SASH
7
SASH (SIDE)
9
SCREW
(LONG)
8
SCREW
(SHORT)
5
CUSHION (TOP)
The manufacturer and/or the distributors of this product cannot be held liable for any damages to the
microwave oven and/or the built-in kit caused by improper installation or adjustment.
Loading ...
Loading ...
Loading ...