Loading ...
Loading ...
Loading ...
www.bissell.com
9
Operations
Vacuuming continued
3. Remove the collection tank from the unit by
opening the Quick Release Hose Door and
lifting the tank straight up by the handle.
4. Remove the top lid from the collection
tank and set aside.
5. Fill the collection tank to the fill line (located
on side of tank) with clean, cold water.
6. Replace the top lid back onto the top of
the collection tank.
7. Set the collection tank back in the machine.
8. Select "WATER FILTER VACUUM" with
the mode selector.
9. Close the Quick Release Hose Door tightly
until it clicks into the locked position.
10. Plug into a proper outlet and press the ON/
OFF button down into the ON position.
Emptying the tank
1. Open the Quick Release
™
Hose Door
and remove the collection tank by lifting
straight up with the tank handle.
2. Remove the top lid from the collection
tank and set it aside.
3. Empty dirty water into a sink or toilet, or
outside. Pour the dirty water out from the
corner of the tank. Rinse out the tank
thoroughly.
4. Refill the tank if needed and replace the top
lid back onto the top of the collection tank.
5. Set the collection tank back in the machine.
6. Close Quick Release hose door tightly
until it clicks into locked position.
7. If finished vacuuming, refer to the Maintenance
and care section starting on page 14.
Wet cleaning
Before you clean
1. Plan activities to give your carpets time to dry.
2. Thoroughly dry vacuum the area to be
cleaned.
3. Plan your cleaning route to leave an
exit path. It is best to begin cleaning in
the corner farthest from your exit.
3
4
5
6
7 8
Loading ...
Loading ...
Loading ...