Loading ...
Loading ...
Loading ...
www.bissell.com
11
Operations
Wet cleaning continued
Carpet Cleaning continued
7. Continue to clean entire carpet working
in one meter by one meter sections.
8. If machine loses suction, stop spraying
and check the collection tank level.
Empty if necessary.
9. If the machine stops spraying turn off
wet clean button immediately and check
the solution tank level.
NOTE: Never run in wet clean
mode when the clean water
formula tank is dry or missing.
When you are finished
1. Turn off the heater, wet clean, and
power buttons.
2. Remove the collection tank from the unit by
opening the quick release hose holder and
lifting the tank straight up by the handle.
3. Remove the top lid from the collection
tank and set it aside.
4. Empty dirty water into a sink, toilet or
outside. Pour the dirty water out from
the corner of the tank. Rinse out the tank
thoroughly.
NOTE: You may leave the solution
tank with water and formula in it
so you are ready for the next use.
5. Allow all parts to dry before storing.
Hard Floor Cleaning
1. See “Getting Ready to Wet Clean” on
Page 10.
2. Be sure to use BISSELL Hard Floor
Solutions in the solution tank for hard
floor cleaning. Fill the formula tank by
first unscrewing the measuring cap.
Always use genuine BISSELL formulas to
maximize cleaning and for the safety of
your machine. Fill tank to fill line with hot
tap water. Add one full cap of formula.
Screw measuring cap tightly back onto
the solution tank.
3. Set the solution tank back in the machine.
2
3
2
Loading ...
Loading ...
Loading ...