Loading ...
Loading ...
Loading ...
05/2019
- 11 -
Copyright © 2019, Fast ČR, a.s.
2. Sleep function
Press the SLEEP button C19 and the selected temperature will increase by 1 °Cafter 30 minutes (cooling mode). After another 30 minutes the temperature will
again increase by another 1 °C(cooling mode). The portable air conditioner will maintain the new temperature for aperiod of 7 hours and then will revert to the
initially set temperature. In this way, the sleep function will be completed and the portable air conditioner will continue in the initially set operation.
Note:
This function is not available in the fan and dehumidification modes.
3. Setting the flaps
The flaps may be set in the air flow direction. When the portable air conditioner is turned on, the flaps are fully open. Press the SWING button C13 to activate the
automatic oscillation function. The flaps will oscillate up and down automatically. Do not set the flaps manually.
B. REMOTE CONTROL
Inserting and replacing batteries
Slide out the battery compartment cover, which is located on the rear side of the remote control. Place two AAA/LR03 (2× 1.5V) alkaline batteries into the battery
compartment and close the cover.
When inserting the batteries ensure the correct polarity as shown in the battery compartment.
When replacing the batteries, always use batteries of the same type, never combine old and new batteries or batteries of various types.
Note:
Removing the batteries from the remote control will delete all the settings. After new batteries are inserted the default remote control settings as
programmed by the manufacturer will be renewed.
If you will not be using the remote control for longer than 2 months, remove the batteries.
Using the remote control
For the remote control to work correctly, ensure that the maximum distance of the remote control from the portable air conditioner is not greater than 8 m and
that there is no obstacle between the remote control and the portable air conditioner that could prevent the transmission of the signal.
Point the remote control directly at the remote control sensor on the portable air conditioner A4. The transmission of the signal is confirmed by ashort sound signal.
Do not expose the remote control nor the sensor A4 to direct sunlight or high temperatures. Otherwise the signal may not be transmitted.
Turning the portable air conditioner on and off
To turn on the portable air conditioner, press the ON/OFF button D2 once. When it is first started, the cooling mode is set automatically. When it is started again,
the mode that was activated previously is automatically resumed.
To turn off the portable air conditioner, press the ON/OFF button D2 again. The portable air conditioner will switch off to stand-by mode.
Setting the temperature
The temperature of the portable air conditioner can be set to arange between 17°Cand 30°C. Increasing or decreasing the temperature is always performed
in increments of1 °C.
Operating modes
1. Cooling mode
Repeatedly press the MODE button D3 until COOL is lit on the display D1. Using the TEMP button D5, set the desired temperature.
Using the FAN button D4, set the fan speed. Press the FAN button D4 repeatedly to set the fan speed in the following order: low speed – medium speed – fast
speed – automatic speed.
Press the ON/OFF button D2 to turn on the portable air conditioner.
2. Dehumidification mode
Repeatedly press the MODE button D3 until DRY is lit on the display D1.
Using the TEMP button D5, set the desired temperature.
Press the ON/OFF button D2 to turn on the portable air conditioner.
Note:
It is not possible to change the fan speed in the dehumidification mode.
3. Automatic mode
Repeatedly press the MODE button D3 until AUTO is lit on the display D1. Using the TEMP button D5, set the desired temperature.
Press the ON/OFF button D2 to turn on the portable air conditioner.
The portable air conditioner will automatically select the appropriate mode and fan speed based on the set temperature and the room temperature. It is not
possible to set the fan speed in the automatic mode.
4. Fan mode
Repeatedly press the MODE button D3 until FAN is lit on the display D1.
Using the FAN button D4, set the fan speed. Press the FAN button D4 repeatedly to set the fan speed in the following order: low speed – medium speed – fast
speed – automatic speed.
Press the ON/OFF button D2 to turn on the portable air conditioner.
Note:
In the fan mode, it is not possible to set the temperature, therefore no temperature information will be shown on the display D1.
Functions of the portable air conditioner
1. Automatic start and shut-off function
A. Automatic start
The automatic start function makes it possible to set atime after which the portable air conditioner will start automatically.
– While the portable air conditioner is turned off, press the TIMER ON D9 button. The last set time in hours (h) will be shown on the display D1.
– Repeatedly press the TIMER ON D9 button until the time after which the portable air conditioner will automatically start appears on the display D1. For
example, when atime of “2 h” is set, the portable air conditioner will start 2 hours after the current time.
– Wait approximately 2 seconds for the entered time to be confirmed and saved to memory. The set temperature is shown on the display D1.
B. Automatic shut-off
The automatic shut-off function makes it possible to set atime after which the portable air conditioner will shut off automatically.
– While the portable air conditioner is turned on, press the TIMER OFF D10 button. The last set time in hours (h) will be shown on the display D1.
– Repeatedly press the TIMER OFF D10 button until the time after which the portable air conditioner will automatically shut off appears on the display D1. For
example, when atime of “2 h” is set, the portable air conditioner will shut off 2 hours after the current time.
– Wait approximately 2 seconds for the entered time to be confirmed and saved to memory. The set temperature is shown on the display D1.
Note:
Using the +/- buttons C16 andC17 set the time in 30-minute increments (up to 10 hours) and then in 1-hour increments (up to 24 hours). If no button is
pressed within 5 seconds, the portable air conditioner will return to the initial mode. When the automatic start / shut off time is set to "0.0", the function
will be turned off. In the event of afault, the automatic start or shut-off function will be automatically cancelled.
Loading ...
Loading ...