Loading ...
Loading ...
Loading ...
en Trouble shooting
24
3Trouble shooting
Trouble shooting
:Warning – Risk of injury!
Incorrect repairs may cause serious hazards. Repairs to
the appliance must only be carried out by a qualified
technician. If repairs are required, contact the after-
sales service.
Fault table
Error messages
If an error message with “ appears, press the 0
button. The message disappears. A time function that
has been set is cleared. If the error message does not
disappear, please contact the after-sales service.
You can take remedial action yourself if the following
error message is displayed.
:Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our trained after-sales engineers.
Fault Possible cause Remedy/information
The appliance does not work. The circuit breaker is faulty Look in the fuse box and check that the circuit
breaker is in working order.
Power cut Check whether the kitchen light works.
Zeros flash in the display. Power cut Reset the time.
The oven light has failed. Faulty oven light Change the oven light bulb. (See section "Replacing
the oven light")
The gas burner does not ignite. Power cut or damp ignition plugs Light the gas burner with a gas lighter or a match.
The oven does not heat up. Faulty fuse. Check and, if required, replace the circuit breaker.
The function selector has not been set. Set the function selector.
All dishes that are prepared in the oven burn
within an extremely short period of time.
Faulty thermostat Call the after-sales service.
The door panel steams up when the oven is
hot.
Normal occurrence; caused by the difference in
temperature
Not possible; this has no effect on oven perfor-
mance.
Error message Possible cause Remedy/information
“‹‚‚ A button was
depressed for too
long or is cov-
ered up.
Press all buttons individually.
Check whether any buttons
are jammed, covered up or
soiled.
Loading ...
Loading ...
Loading ...