Loading ...
Loading ...
Loading ...
18 | nuwavenow.com
Warm
Press and hold Preheat/Warm to activate
the Warm function. The display will show
“140°F”, “Warm”, and “Temp”. Press
and hold Preheat/Warm to cancel it. The
defaults are 140°F for 1 hour.
1. Adjust the Warm temperature by
turning the START/PAUSE dial. The
selectable temperature range is
140°F–200°F.
2. Adjust the Warm time by pressing
Temp/Time then turn the START/
PAUSE dial to select a warm time up
to 3 hours. Press START/PAUSE. The
unit will preheat (if selected) and then
cook at the set temperature and time.
It will then keep warm according to the
set Warm temperature and time.
Reheat
Reheat warms your leftovers through,
restoring flavor and texture. Pressing
Reheat and then START/PAUSE, or
pressing and holding Reheat starts this
function. Reheat defaults to 350°F for 4
minutes but has a selectable temperature
range of 50°F to 450°F and a time range up
to 1 hour.
You should always reheat food until it is
steaming hot throughout to prevent risk of
infection caused by bacteria breeding in the
40°F to 140°F temperature zone. Always
serve heated food immediately. See the
Selectable Cooking Times table on page 19
for more information.
Notes
• The maximum reheat time is tied to the
selected reheat temperature.
Delay/Delay End
Pressing Delay lets you start or end the
cooking process at a time convenient for
you. However, you have to have the Clock
properly set (see page 25).
Delay Start (Cooking will begin at a given
time)
1. Set up the Pro-Smart Grill to cook
according to your recipe.
2. Press Delay. The display will show the
current clock time and “Delay”.
3. Adjust to the desired cooking start time
(up to 24 hours) by turning the START/
PAUSE dial.
4. Press START/PAUSE. While the unit is
waiting, “Delay” will flash in the display.
At this time, to adjust the delay time,
press Delay. “Delay” will stop flashing
and the delay time will be displayed.
It may now be adjusted by turning the
START/PAUSE dial. To cancel Delay
and start cooking at once, press Delay
again.
5. After the delay time has elapsed, the
unit will begin the cooking cycle.
Delay End (Cooking will end at a given
time)
1. Select the function or Preset to be used
and make any needed adjustments to
the temperature and time.
2. Press and hold Delay until “Delay E”
appears. The display will show the
current clock time and “Delay E” will
be flashing.
3. Set the clock to the time you’d like
cooking to stop (up to 24 hours)
by
turning the START/PAUSE dial. Be
sure the set cook time does not exceed
the set end time
4. The cooking process will finish at the
selected end time. The unit will then
beep 3 times and display “END”.
BASIC FUNCTIONS
Loading ...
Loading ...
Loading ...