WD201 OWNER’S GUIDE

Loading ...

USING YOUR 3-IN-1 CLEANER

POWER

HARD FLOOR MODE

MAINTAINING YOUR 3-IN-1 CLEANER

1. Place the unit on the charging dock.

2. Empty the Dirty Water Tank and make sure the

clean solution tank is at least half full.

3. Press the Power Button to start the self-clean

cycle. The icon will pulse for the full 2-minute

duration of the cycle.

4. DO NOT remove the unit from the dock during

the self-clean cycle. The icon will turn o when the

cycle is complete.

5. Empty the dirty water tank.

See LED Glossary for more information on indicator

lights during self-clean cycle.

Press and release the Power button on the handle

to turn on power. To turn o power, press the

button again.

Use Hard Floor mode for powerful cleaning on bare

ﬂoors. To activate Hard Floor mode, turn on the unit

and tilt the handle back.

To clean area rugs, press the Area Rug icon on top of

the handle. The Area Rug light on the main body will

illuminate. To turn o Area Rug mode (and to switch

back to Hard Floor Mode), press the button again.

CONTROLS SELF-CLEAN CYCLE

CLEANING MODES

NOTE: Make sure the clean solution tank is at least half full and that the dirty water tank is empty before running the self-

clean cycle.

NOTE: To prevent leakage, DO NOT place the main body on the ﬂoor. The nozzle should always be kept ﬂat on the ﬂoor.

NOTE: If you encounter a dicult stain, use Area Rug Mode for improved stain cleaning.

NOTE: If you encounter a stubborn odor on your ﬂoor or area rug, continue to clean in Area Rug mode until the odor is gone.

NOTE: If your ﬂoors are cloudy, streaky, or spotty after cleaning, it may be due to accumulated soap or grease residue. The

ﬂoor may require several cleanings with the Hydrovac.

The self-clean cycle automatically cleans the system and the brushroll.

Recommended after every use

sharkclean.comsharkclean.com

AREA RUG MODE

Loading ...

Shark WD201 WD200 Series HydroVac Cordless Pro XL 3-in-1 Vacuum, Mop & Self-Cleaning System