WD201 OWNER’S GUIDE

Loading ...

USING YOUR 3-IN-1 CLEANER

Press the release button and lift o the Clean Solution Tank.

NOTE: When docked properly, the charging lights on the Main Body will blink, indicating that charging has begun. When

charging is complete, all three indicator lights will turn o.

NOTE: The main unit comes with a partial charge. For maximum runtime, charge fully before ﬁrst use (approximately 4

hours). Leaving the unit charging will not damage battery life.

NOTE: Only use Shark HydroVac Multi-Surface Concentrate, Shark HydroVac Disinfectant, and water with this product.

NOTE: Be sure to not overﬁll the Clean Solution Tank with more HydroVac Multi Surface Concentrate than instructed, as this

may clause streaking.

NOTE: Without sucient water supply in the clean solution tank, HydroVac will not run.

USING YOUR 3-IN-1 CLEANER

CHARGING ON THE DOCK

CORD WRAP CONTACTS

DOCK CHARGING

Charge the unit by placing it on the dock. Make sure the contacts on the body are aligned with the contacts

on the charging dock.

The Battery Icon on the main body will illuminate when charging begins.

When charging is complete and you need to use the unit again, lift it o the dock.

FILLING THE CLEAN SOLUTION TANK

REMOVE THE CLEAN SOLUTION TANK

FILL THE CLEAN SOLUTION TANK

Unscrew the cap and add water to the tank, up to the WATER line. Next, add Shark HydroVac™ Multi-Surface

Concentrate, ﬁlling to the HYDROVAC CONCENTRATE line. Replace the cap and reinsert the tank until it clicks

into place. The top of the tank should be ﬂush with the top of the body.

sharkclean.comsharkclean.com

Loading ...

Shark WD201 WD200 Series HydroVac Cordless Pro XL 3-in-1 Vacuum, Mop & Self-Cleaning System